bump.

$200 OBO

Selling New, never used OpenFlash Tablet V2 BRZ FR-S GT86
Send a direct message if you are interested.
$400 firm


Sent from my iPad using Tapatalk

Some free stuff:

Kartboy rear shifter bushing (160k miles)
Heated seat switch (burned out led)
eBay carbon heated seat switch cover/dash vent covers
eBay rubber console tray, BRZ cubby tray, FRS cubby tray, brz/FRS cup holder rubber mat
2x oem silver gas/brake pedals (half worn)

https://i.imgur.com/GSXT3Ji.jpg

https://i.imgur.com/FKNZlXe.jpg

Bump

Looks like someone in Tracy is selling theirs for $600.

https://www.facebook.com/marketplace...type=top_picks

Parting out built moto/turbo build

Selling motor built by Moto East capable of 650+hp motor is stripped down. Blown head gasket and scorched 1 out of 4 pistons everything is in good shape.

Motor internals-Carrillo rods, Cp pistons 10.1 CR, king main oil bearings, Remix oil pump. Motor has less than 13k miles since rebuild less than 18k miles in total on motor!!-$$ BEST OFFER

Also selling a MAP turbo kit, infamous EBC, turbo smart race port bov, turbo smart wastegate offered from map, precision 5858 turbo, Dw 65c fuel pump I believe, and fic 770cc fuel injectors great condition less than 13k on the kit total-$ BEST OFFER

Manual Trans, drive shaft, great condition less than 25k

Also selling-Act Xtclutch disc and plate less than 3k miles on it-$ BEST OFFER

Willing to work out a killer deal if someone is looking to buy a good amount of it!! PM me of interested

Sent from my SM-S908U1 using Tapatalk

Thanks. The guy didn’t want to sell it for the longest time then sold it. I’ll just have to wait for another one or until shipping prices are more reasonable.

WTB

2013 Scion OEM struts, springs, and top hats.

I need them while I rebuild my KW V3s.

I'm in the Santa Cruz area, but work at Palo Alto.

Cheers

Sent from my Pixel 6 using Tapatalk

FOR SALE - Invidia High Flow Front Pipe and N2 Exhaust
 

Selling my Invidia exhaust parts. They're in good condition - all hardware included (except for gaskets, since they're already used).
I'm located in the Sacramento area.



Invidia High Flow Front Pipe - $250
https://i.ibb.co/bWxt6fL/IMG-2017.jpg
https://i.ibb.co/gryqw33/IMG-2018.jpg


Invidia N2 Exhaust w/ Titanium tips (ftspeed.com exclusive) - $250
https://i.ibb.co/cQXYjF4/IMG-2016.jpg


BUY BOTH? $400 total ($100 off)
https://i.ibb.co/wS60wXL/IMG-2014.jpg

bump
obo

Set of Rays Gram Light 57xtreme 17x9 5x100 40mm wrapped in Indy 500 245/40 (less than 3000 miles). Original color is black but was recently professionally painted white. One wheel has mild curb rash that has received touch up paint. Looking to get $1200 preferably picked up in Stockton area. Willing to meet anywhere else.

https://scontent.fsac1-1.fna.fbcdn.n...Dg&oe=62DE4E23

https://scontent.fsac1-1.fna.fbcdn.n...gA&oe=62DDBF4C

https://scontent.fsac1-2.fna.fbcdn.n...Ng&oe=62DCE57A


https://scontent.fsac1-2.fna.fbcdn.n...7Q&oe=62DCBC0B

https://scontent.fsac1-1.fna.fbcdn.n...1Q&oe=62DDA1C1

https://scontent.fsac1-1.fna.fbcdn.n...Dw&oe=62DC922A

https://scontent.fsac1-1.fna.fbcdn.n...VA&oe=62DD0852

Please don’t make me deal with Facebook and grab these in the next week or so.

Tomei EL header - Sold [$400]
Had on the car for maybe 20k-30k miles, discoloration from use, a few rub marks on the skidplate but otherwise excellent condition, bungs thread easily, welds look good, some carbon buildup but otherwise beautifully made. I wish my jdl was built this nice.

Mann Engineering 13mm rear sway bar $160
3 hole adjustable from stock bar stiffness to softer. A few rub marks from installation, other then that nothing wrong with it. On the car for maybe 15k miles?

Whiteline 20mm front sway bar $160
2 hole adjustable, some rub marks from the front wheels, no problems. On the car for ~40k miles

Megan racing end links front adjustable- $80
These came with my coilovers, shorter length for specific coilovers, newer locknuts. No guarantee they fit your setup and honestly I want them around as backups but I’m not using them anytime soon.

https://i.imgur.com/aQ3ry6g.jpeg

I also have a set of SPC rear toe arms, forgot to take pics today, will do tomorrow.

I live in East Bay, work in South Bay, can meet in the greater Bay Area. Cash is king but we can do an app.
I'll also be at Crows tomorrow if you message me tonight.

More pics:
https://imgur.com/a/nO8a7nd

Sent a PM

Selling Seibon-Carbon Fiber Sideskirts Ts stylr (driver side part is damaged) passenger side great condition.. (Letting go for cheap)

Also selling stock frs seats and asphalt gray trunk.

Pm for pics and more info.

Local to fremont/sj/hayward area. Open to doing local meetup.

Very negotiable!