Originally Posted by swimfest (Post 3184104)

Bump. New price is $300.

Originally Posted by Mr_Eyo (Post 3184520)

Also, RaceRamps RR56 10.7 deg 8" high ramps, never used.

Originally Posted by BRZY (Post 3154725)

$220 - OpenFlash Header - verison 1
$160 - Grimmspeed Intake - comes with extra K&N filter and cleaning kit
$80 - Berk Downpipe - catless
$40 - Centric Blank Rear Rotors - brand new
$40 - Struts and Springs - from 2013 BRZ without top hats
$140 - Crawford Air Oil Separator
$140 - Whiteline Front Sway Bar - 20mm adjustable, comes with endlinks, not pictured
$1500 - AP Racing Sprint Kit - including pads: Hawk HPS front, Project Mu Club Racer f&r, Ferodo DS2500 rear
$1600 - Ohlins R&T SUS MI20 - includes top hats with camber adjustment, 6K f&r spring rate

https://i.imgur.com/tndwyH7.jpg?6
https://i.imgur.com/sNwYXsV.jpg?1
https://i.imgur.com/IxJSjGX.jpg?2
https://i.imgur.com/E2cEgGd.jpg?3
https://i.imgur.com/MPAIkr7.jpg?1
https://i.imgur.com/nLxDrue.jpg?3
https://i.imgur.com/xNGAzSK.jpg?1
https://i.imgur.com/VTwaEsn.jpg?1

Originally Posted by thriller (Post 3178743)

I'm doing my annual garage cleaning and I have the following for sale. I'm open to any offer on most the stuff below (even if the offer is just a 6-pack of beer). I'm more interested in getting the space back in my garage than making a profit. All of it is available for pickup in Sunnyvale. Everything is from a 2016 BRZ with 15k miles or less on it. Send me a message if you want pics of anything.

HT Autos BRZ lip kit - CS style (unpainted black polyurethane, some scratches on the underside) + HT Autos side skirts / rear spats (matches the lip kit / some scratches + tape left on it, but nothing visible) + mounting hardware - $100

Grimmspeed intake (on the car for ~10k miles, filter looks new) - SOLD

One piece Alcantara dash cover for 2016 BRZ (has the trapezoid-shaped radio cutout) from JPM Coachworks - $50

Make an offer:

OEM 2016 BRZ stereo
OEM clutch fork
OEM clutch pivot
OEM speakers (all 6)
OEM clutch / pressure plate / flywheel (the clutch itself is worn, but other parts are fine)
Pair of Rhinogear 11909ABMI ramps - should work fine for stock height. I'm lowered and have a lip kit, so I can't get up them anymore, 12,000lb capacity
Ridgid Shop Vac - 5HP / 12 gallon - works fine but hose is partially collapsed. - SOLD

Originally Posted by Mr_Eyo (Post 3184520)

Have BNIB:

• HKS Dual resonated front pipe
• Invidia over pipe
• Spyder smoked sequential tail lights
• GCS smoked 4th brake light w/ F1 flashing
• GCS Helix smoked sidemarkers w/ turn signal wires
• FT86SF Catted UEL header ceramic black coated
• GoFastBits 3pc light weight pulley set (crank, alt, water pump)
• Perrin light weight crank pulley
• GrimmSpeed crank pulley tool

Also have OEM parts from my 2017 A/T 86:

• Driveshaft
• Brake rotors and calipers
• Shocks/struts/springs
• Headlights
• Taillights
• Radiator
• Intake w/ K&N filter, manifold, sound tube
• Exhaust tips
• Sidemarkers
• 3rd brake light
• Rearview mirror
• 4.1 ring & pinion FD
• Spare tire & tools

I also have a full 4.1 pumpkin w/ 37000 miles from a wrecked 2015, looking to trade it for a 4.3 pumpkin from a 2017+ M/T.

Also, RaceRamps RR56 10.7 deg 8" high ramps, never used.

Originally Posted by YoImNotBad (Post 3185389)

How much for the headlights?