Will take $700 for both FlexFuel kit and OFT.

Shift knob
 

3D Print Shift Knob w/ reverse lock-out cutout - $Free.99

I got bored of looking at the $100+ price for a shift knob so here ya go (not dissing anyone who buys them I personally can't convince myself its worth the $100) Link for the STL file and Solidworks file. https://www.thingiverse.com/thing:3377481

HRE FF15 wheels in Tarmac Black 18x9 +40 with 255/35/18 Hankook V12 Evo2 tires

Wheels are in good condition, never been curbed, bent or damaged. Two of the wheels have small rock chips, shown in photos. Two tires have about 40% tread left, and two tires have about 60% tread left. Put the 60%ers on the rear, and you should get another 15k miles out of them.

These wheels may be too wide to mount on stock suspension, I had them paired with BC Racing BR coilovers, no rubbing issues whatsoever. Direct fit, no hub rings or spacers required.

Looking for $1500.00

Located in SF, Inner Sunset.

Still looking for a TRD catback (D tips) if anyone wants to part ways with theirs!!

Complete Power Folding Mirror Changeover
 

Price drop to $650, pick up in San Jose



Videos here:



https://www.dropshots.com/CCJXXX/dat...02-23/13:23:23
https://www.dropshots.com/CCJXXX/dat...02-23/13:23:21



I have a complete mod/changeover for power folding mirrors. These mirrors are from Germany. Mirrors are heated and by my estimation wider than US mirrors. I bought two sets and installed one on my car. My second set is for sale.



What you get:
- 7-pin heated mirrors with power folding and power adjust.

- Black mirror covers. You can swap your covers on the Euro mirrors match the color of your car.

- Electrical switch on the door to fold the mirrors.






- Door bezel in matte finish for earlier cars.

- Wiring diagram (in English, for RHD cars).

- Cables and pins so that wiring can be added to the existing connectors.

- I have pictures of the installation and can provide technical support.



I do not have the auto-retract relay. The relay was sold by Subaru/Toyota at additional cost. I can provide an E-Bay link on request.



I'll provide help and support to do the installation. There are good YouTube videos on how to change a side mirror. If you can change out the side mirror and you can install a backup camera, you can do this modification.



To my knowledge, my BRZ Limited is the only car with power folding mirrors in the US. Yours can be the second.



Meetup in West San Jose or Santa Clara.



$700 or best offer. Now you know why my BRZ Limited is the only car with power folding mirrors in the US! Unfortunately the mirrors are not cheap and shipping from Europe is expensive. Having said that, They are very cool and I enjoy them.



If you're interested, I also have a set of four JDM red-stitch speaker covers and transmission tunnel trim. If you want to go that route, it makes sense to do both upgrades at the same time. $200 or best offer, discount for package deal.

http://i63.tinypic.com/2up4ho3.jpg

http://i63.tinypic.com/m82nuq.jpg



Thanks, Chris

Sold. . . JDM red-stitch speaker coversa and knee pads
 

These have now been sold.



I have a set of four red-stitched knee pads and transmission tunnel pads.

Used in excellent as-new condition



Pictures to follow, or PM me with an e-mail address for faster response.



Meet up in West San Jose or Santa Clara.



Thanks for looking, Chris

Bump

For sale:

Greddy single exit exhaust with passenger hole cover $440 or trade for Perrin 2.5 resonated exhaust.
Ultimate racing 2.75 inches front and over pipe both for $240
Blue Perrin intake tube $50 (retail $109)
Stock intake with K&N filter $50
Stock front pipe $80

OFT for sale - $375. Please PM with any questions.

I'm doing my annual garage cleaning and I have the following for sale. I'm open to any offer on most the stuff below (even if the offer is just a 6-pack of beer). I'm more interested in getting the space back in my garage than making a profit. All of it is available for pickup in Sunnyvale. Everything is from a 2016 BRZ with 15k miles or less on it. Send me a message if you want pics of anything.

HT Autos BRZ lip kit - CS style (unpainted black polyurethane, some scratches on the underside) + HT Autos side skirts / rear spats (matches the lip kit / some scratches + tape left on it, but nothing visible) + mounting hardware - $100

Grimmspeed intake (on the car for ~10k miles, filter looks new) - SOLD

One piece Alcantara dash cover for 2016 BRZ (has the trapezoid-shaped radio cutout) from JPM Coachworks - $50

Make an offer:

OEM 2016 BRZ stereo
OEM clutch fork
OEM clutch pivot
OEM speakers (all 6)
OEM clutch / pressure plate / flywheel (the clutch itself is worn, but other parts are fine)
Pair of Rhinogear 11909ABMI ramps - should work fine for stock height. I'm lowered and have a lip kit, so I can't get up them anymore, 12,000lb capacity
Ridgid Shop Vac - 5HP / 12 gallon - works fine but hose is partially collapsed. - SOLD

Any pics of the Alcantara one piece dash?

Sure, here you go. I think this was the first one they did that had the weird-shaped 2016 radio opening. It looks good and matches the other JPM Coachworks stuff I have.

https://i.imgur.com/aLEn0BI.jpg

https://i.imgur.com/RksUP9K.jpg

Anyone have a spare or willing to sell their rear bumper in 37J for a good price? Would like to have an extra one to cut when I install TRD Quad Exhaust.

Have BNIB:
HKS Dual resonated front pipe
Invidia over pipe
Spyder smoked sequential tail lights
GCS smoked 4th brake light w/ F1 flashing
FT86SF Catted UEL header ceramic black coated

Also have OEM parts from my 2017 86:
Driveshaft
Brake rotors and calipers
Shocks
Headlights
Taillights
Radiator
Intake w/K&N filter
Exhaust tips
Sidemarkers
3rd brake light