Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Southwest (https://www.ft86club.com/forums/forumdisplay.php?f=15)
-   -   Anybody in Tucson, AZ area want to help test fit?? (https://www.ft86club.com/forums/showthread.php?t=19940)

JoeBoxer 10-16-2012 07:13 PM
Anybody in Tucson, AZ area want to help test fit??
 
1 Attachment(s)
I have been emailing with Saikou Michi Co about getting a catch can made for my vehicle, they work with PSI Automotive and i'm hoping somebody would be willing to take their car by so they could take some measurements. Here is the guide if you think you can figure it out without taking the car by.

martin86 10-17-2012 10:24 PM
Hmmm I might be able to swing by there on Friday if they had time. I have a BRZ should be the same measurements I would assume though.

RedLeader 10-17-2012 10:43 PM
I'm not doing anything tomorrow, where is this place?

martin86 10-18-2012 02:39 AM
It looked like it was on Grant right off of I-10 on the right hand side before you hit Silverbell.

JoeBoxer 10-19-2012 02:52 PM
Quote:
Originally Posted by martin86 (Post 504503)
It looked like it was on Grant right off of I-10 on the right hand side before you hit Silverbell.
That's correct, let me know before you go if possible so i can let the catch can manufacturer know you are going so they are aware of it when you get there.

schtebie 11-11-2012 08:36 PM
Quote:
Originally Posted by JoeBoxer (Post 507949)
That's correct, let me know before you go if possible so i can let the catch can manufacturer know you are going so they are aware of it when you get there.
Were any forum members able to bring their car by so the guys at Saikou Michi could look at the FR-S/BRZ?

JoeBoxer 11-11-2012 08:51 PM
If they did i haven't heard anything.

martin86 12-06-2012 12:55 PM
Yeah I never heard back until after the day I was available to go. And I'be been body with work since then if you still need someone you can inbox me

Sportsguy83 02-05-2013 03:41 AM
Quote:
Originally Posted by RedLeader (Post 503996)
I'm not doing anything tomorrow, where is this place?
Quote:
Originally Posted by martin86 (Post 503951)
Hmmm I might be able to swing by there on Friday if they had time. I have a BRZ should be the same measurements I would assume though.
Could any of you be so kind as to make this happen :D :thanks:

AZ BRZ 02-06-2013 02:15 AM
I can do it anytime. Let me know if nobody has.

Sportsguy83 02-06-2013 09:04 PM
Quote:
Originally Posted by AZ BRZ (Post 715178)
I can do it anytime. Let me know if nobody has.
Nobody has, it would be awesome if you could do it.

@JoeBoxer

Is this the PSI Automotive they need to contact?


PSI
1653 W Grant Rd, Tucson, AZ
(520) 293-6620 ‎

JoeBoxer 02-06-2013 11:50 PM
I'm pretty sure, best bet would be to email the catch can contact on their website and make sure i never really followed up on this one.

Sportsguy83 02-07-2013 03:36 AM
Quote:
Originally Posted by AZ BRZ (Post 715178)
I can do it anytime. Let me know if nobody has.
I've emailed them, will let you know when they answer back. Thanks!

AZ BRZ 02-07-2013 04:31 AM
Quote:
Originally Posted by Sportsguy83 (Post 717999)
I've emailed them, will let you know when they answer back. Thanks!
Sounds good!


All times are GMT -4. The time now is 09:14 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.