Ready to Lower!! - Last minute advice
 

Well, I have read a ton of stuff on this board. Really T.M.I.

I enjoy driving the FRS as is stock. I go the the track about twice a year, but I drive for fun, not for the best time. This is my daily driver! Most of my driving is city. Roads are OK, but a few bad spots on my daily drive (4 miles each way).

My primary reason for lowering is for looks. Not after a slammed look, just more like the car should have looked.

I will be getting 18's in the near future. I just plasti dipped my stock wheels and I really like the way they look. Would just like them to sit out a bit (more flush with the fenders.

So.. At this point, I am thinking of ordering the Tein Flex coil-overs. From what I have read, these seem to be a good value / performance for me. It seems like the general consensus with lowering springs is that "I wish I bought coil-overs". Also, coil-overs are easier to install and the Tein's have a camber adjustment. These are a little more then I wanted to spend on lowering the car, but I would rather spend a bit more now and be happy.

Plan is to install these and put some spacers on the stock wheels. Will probably go to 18 x 8's when I find some that I really like.

So any last minute advice would be appreciated. I will support the board sponsors.

Teins are not a bad at all. Fortune Auto is what we are running on our car right now and just finished a time trial event with yesterday.

Buddy Club racing spec is on the way to us and we have a review coming on those and they fit your bill perfectly IMO as well.

I am very interested in those as well. What is the longevity of tein on a DD, anybody knows?

Tein builds theirs coils to last 50,000-60,000 miles like most.

Not that will also depend greatly on the use they see.

Salt, slamming, track use, bad roads, etc will take their toll so all things to think about long term.

If you are really interested in just a mild drop and not completely slamming the car to the ground, then I would recommend a good set of springs. Our 1" Drop Sport Springs will give you the exact look you are after, work great even on stock shocks, and still ride very comfortably on your daily commute.

Here is what the car looks like with just a set of springs installed:

http://maildogmanager.com/pics/KahnM...file-forum.jpg

If you are looking for something to give you a bit more edge when you go to the track a couple times a year then I would recommend our Stage1 Total Vehicle System:

http://maildogmanager.com/pics/KahnM...ic-small_1.jpg

This kit will give you everything you need to give you the edge you want on the track. The kit includes the Sport Coil Springs, 2-way adjustable front sway bar, and 4-way adjustable rear sway bar with end links. This adjustablility will let you tailor the driving experience to your preference for how a car should handle (slight understeer, neutral, slight oversteer) and match the roll resistance with the grip level of your tires. Here is how our Project FR-S compared with a stock FR-S in the same corner:

http://maildogmanager.com/pics/KahnM...is_-_small.jpg

Look at how much flatter and more composed our car looks compared to the stock car. Also take note that we didn't have to brake into that corner like the stock car.

You can find more information on these parts here: http://www.hotchkis.net/search.html?...mitForm=Search

Well this thread escalated quickly into a commercial

Didn't somebody blow a stock strut already with just lowering springs?

Due to improper installation

glad to see you guys on here! I run your front and rear sways on my VW and it is great stuff. I will absolutely be looking to you guys when it comes to stiffening up the chassis. A few other parts need to come first but glad to see you guys are developing for our platform.

:bow:

I'm selling my Whiteline KCA326 Rear Camber Adjustment Bushing Kit, Brand new, never installed. Originally purchased from Racecomp Engineering, a forum sponsor.

$100 + shipping, US only

The kit will allow you to easily dial out the excessive negative camber in the rear created from the 1 inch drop from the spring.