Anyone know of any fixed caliper kits that will fit under a 16X7 +46 TE37? Wasn't overly happy with my brake performance even with stock power on the track yesterday.

So got the fitment template for the buddyclub BBK.
Buddyclub Template

Not sure which 4Pot 330x28 mil kit it is though, one as a 41 offset and the other has a 50.
Guess ill test both.

Anyone?

You need to contact the kit suppliers directly and ask for a caliper fitting template that you can print and physically apply to the inner of your wheel to check for clearance.

So a little late but Buddyclub 330mm does not fit Enkei RPF1 17x9 +35.
So just dropped a cool 3K (aussie funny money) to get a Essex sprint kit.

http://photos-d.ak.instagram.com/hph...47993682_n.jpg

STI brembo's and Rota Rt5's (18x8.5, ET 38)

Does anyone have a set of CE28RT 17x9 +38s and if so, would a big brake kit fit? Thanks!

Stoptech 328mm fits 17x8 +36 Kosei K4R and 17x8 +45 Enkei RPF1

Which means the AP Sprint fits both as well.

x2, looking for 16x7 options myself

Just put on sti brembos

They DO NOT clear in the FRONT without a spacer

Has anyone fit the Stoptech 355F and 345R with 18x9.5 +38 Enkei RPF1s?

I can confirm this, I have 2012 STI Brembo brakes and run a 8mm spacer in the front.

Has anyone tried the 355 stoptechs with 18x9.5 +38 Enkei RPF1s?? I used the template and it seems to clear EXCEPT for the height.... but stoptech says minimum 18" wheels...

Tried ultra's multi-template (http://www.ft86club.com/forums/showp...9&postcount=81) and seperate templates for essex sprint and essex endurance on 18x7.5 +48 ZE40s.

Essex sprint is a very tight fit, only around 1mm clearance from the spokes. I would use a spacer if i opted for this kit.

Essex endurance has plenty of clearance, around 7mm clearance from spokes and plenty of clearance from rim.

Stoptech 328mm is another good fit, similar to essex endurance.

Alcon 365, 334 and stoptech 355 don't fit. Good clearance from rim, but calipers are too big and don't clear the spokes. All of these would fit with a spacer.