Wilwoods will fit on stock wheels and that was verified via wilwood and the place I got them from.

In terms of aftermarket wheels, I have 18x9.5 all around +38 and no issues. Matter of fact I have a shit load of room. Hope this helps

Finally able to show proof that the TSW 17x8 +45 fits no problem.

http://i.imgur.com/mwvaoYjl.jpg

Wheel: Traklite Angle 18X9 +40 Offset

Physically fitted Stoptech BBK with plenty of room. Did not take pics but tried all templates for Stoptech BBK models, Wilwood and Essex/Sprint. They all fit with plenty of space.

https://lh5.googleusercontent.com/-Q...0/IMG_7575.jpg

has anybody tried RPF1 17x7 42ET with AP Sprint?

Does anyone know if the Wilwood BBK fits OEM wheels or the OEM Space saver

Wilwood BBK WILL fit OEM wheels. THey were designed to do so. I currently have 18x9.5 +38 work emotion cr kai and they have a CRAP LOAD of space!

btw does anyone know if wilwood bbk will fit 17x9.5 +40. i wanna go down a size from my 18s

Endless mini-6 pot caliper
Volk Racing RE30 17x8" +44

http://i.imgur.com/fpWuFNB.jpg
http://i.imgur.com/MA5IwSS.jpg

-alex

Does anyone know if TSW Nurburgring 18x8 +35 will clear the AP kits?

Hi
What about
enkei RS05RR - 18x8.5 +42
For Brembo 4pot front / 2pot rear

Had a few minutes to spare at work so I grabbed a bunch of PDF BBK templates from various manufacturers and overlaid them on top of one another, to scale:

http://i.imgur.com/Bj6o1R7.jpg

Then cleaned it up and made this:

http://i.imgur.com/3Lxixgh.jpg

It's for front callipers only but might help give folks some idea of the relative sizes of certain kits out there.

In theory you should be able to print out the 'cleaned' version of the PDF below, print to scale and quickly measure up a bunch of different callipers on your own but I'm making no claim of 100% fidelity here - these are for indicative purposes only.

Cleaned version of the PDF file can be downloaded here:
https://dl.dropboxusercontent.com/u/...0-%20clean.pdf

Raw version is here (you can open and edit in Illustrator etc.)
https://dl.dropboxusercontent.com/u/...comparison.pdf

As for me, I have the Alcon 343mm kit so apparently I have the widest possible callipers out there (but they're damn fine brakes).
:bonk:

Put my Sprint kit on and the stock wheels fit with 10mm spacers.

http://farm6.staticflickr.com/5544/1...106e1516_z.jpg

Thanks to @CSG Mike, @JRitt, and @ImperiousRex for all the advice and help!

Stock studs?

I used ARP extended studs, similar to most of the guys I mentioned.