| carbonBLUE |
10-16-2012 08:16 AM |
Quote:
Originally Posted by hayolas
(Post 499882)
Hi There, I have a AT/FRS and I just got my car a week ago and I hear the same noise from the break. Clicking sound when breaking to stop and it comes from the gear. If you put your hand on the gear you feel it. I am heading to the dealer next week for the first service and I will report it.
|
its just the car letting you know its safe to go into reverse, tis a gate opening and closing, turn the car on, leave you foot off the break, move the shift selector back and fourth, youll hear the click around the ignition key, its the same type of gate that opens and closes, when the foot is on the brake it opens a gate, when the key is in the ignition it also opens a gate, when both gates are open you can put the car into gear, these are all saftey mechanisms and there isnt an actual problem with the car, car just makes noises, like my last car, made a lot of ticking noises, it was just normal valve chatter, made the noise when i got the car it made the noise after i put in new titanium valves, still made the noise but my engine never blew up
some noises are normal, some arent and are a hint that a part is going to fail
in this case, it is a normal sound from a properly functioning part and every (AT) FRS/BRZ/GT86 does it :D nothing to worry about guys!
|