BC Coilovers, installed today
 

BC BR coilovers, love them. need to bring the front down a notch. ride quality is better than i expected.

thanks to Wicked Innovation in RI

http://farm9.staticflickr.com/8035/8...210ee59b87.jpg
nite1-4 by jszumita, on Flickr

http://farm9.staticflickr.com/8035/8...4939e27e_z.jpg
nite1-3 by jszumita, on Flickr

http://farm9.staticflickr.com/8454/8...2f216d7a_z.jpg
nite1-2 by jszumita, on Flickr

http://farm9.staticflickr.com/8180/8...89821323_z.jpg
low2-1 by jszumita, on Flickr

http://farm9.staticflickr.com/8035/8...6624343d_z.jpg
low2-2 by jszumita, on Flickr


i just need to find a new catback, the AP hangs down lower than others and its too close to the ground near the rear diff.
my driveway is really steep and i can make it in no problem. rear liners rub slightly on the inside rear, going to adjust it when i get it on the lift and do an alignment.

wheel size 18x8.5 +45, 215/40
-Jesse

dam looks nice cant wait to get mine

Looks clean man, way to go!

http://farm9.staticflickr.com/8042/8...375c9ae7_z.jpg
cornfield-1 by jszumita, on Flickr

installed mine yesterday, ride quality is better than i expected too but i set every damper to the softest setting possible for now. What are your settings? camber etc?

im +3 clicks off the softest, the ride is actually really good. i ended up with about -3 camber in the rear, still need to do an alignment. will have to see if i need new rear control arms or toe arms.

http://farm9.staticflickr.com/8309/8...1e925631_c.jpg
1.8 50mm by jszumita, on Flickr

Did u get the extreme drop option or the default coilover kit?

also how easy is to adjust the height

It's pretty easy to adjust the height, just remember not to mess with the two spring collars on top.

Yeah watch a YouTube video so you don't mess with pre load lots of people do

i think my friend touch the preload

looks great

What tint level is that? 50%?