![]() |
Seven's Hot Lava FR-S...HPDE warrior... See how much whp n/a and then AVO TURBO...
***NEWS*** - Updating the first post with plans for the car as they are pretty much finalized... I will note weather and item is installed, not installed, or pending shipping also (if there's nothing after it, I haven't bought it yet).
Current Plans... Engine/Performance -Injen Intake - Installed -Perrin Pulley - Installed -Agency Power Over/Front Pipe - Installed -Invidia Q300 Cat-back (Ti Tips) - Installed -Drift Office 92 octane tune - Completed -AVO turbo kit - Deposit sent -Upgraded injectors -Upgraded Fuel Pump -Tune for turbo on 92 and E85 EXTERIOR -Tail light tint from Midnight Window Tinting - Installed -15% Window tint from Midnight Window Tinting - Installed -Toyota Front and Rear Badges - Installed -86_ZN6 Center Console "86" plaque (actually interior but its basically the only interior mod I'm doing) - pending shipping -Modded Headlight housings - DIY Not done yet -DDMTuning HID kit - Installed -86_ZN6 shark style antenna - pending shipping -Downforce CF front Lip -BaysonR CF sideskirts -TRD Japan rear spoiler SUSPENSION/BRAKES -Koni Yellow Adjustable Shocks - pending shipping -RCE Yellow Springs - waiting for shocks to install -OEM Camber/Crash bolts - waiting for shocks to install -Strano 22mm hollow front sway bar - pending shipping -Hawk HP+ Front Pads/HPS Rear Pads - Not installed -Goodridge Speed Bleeders - not installed -Goodridge Lines - not installed -Motul RBF600 Fluid - not installed -Carbotech f/r track pads WHEELS/TIRES -(Winter) MK4 Golf 15x6.5in wheels/Michelin X-ice Snow tires - In storage -(Street) ESM 004 18x9in wheels/Continental ExtremeContact DW 255/35-18 Tires - Installed -(Track) Enkei RPF1 17x9in wheels /Hankook Ventus RS-3 255/40-17 tires *UPDATES POSTED BELOW* MK4 Golf 15s for snow wheels/tires Injen Intake and Perrin Pulley Installed Other threads of note... How to wash your car in an hour or less, make it look like a pro, and not go broke... Why I decided on Koni+RCE vs coilovers So I figured I should start a member journal here, perhaps copy it to other forums where member journals are available as well... I'll start my first post with my review/info about me that I posted on another forum... Quote:
|
Pics after doing a clean up since the drive from NM to WA... Optimum No-Rinse, Clay'd it, Meguair's #205, Opti-Seal, Dodo Juice Supernatural wax. Vacuumed and dressed the tires... Stock with an old polished stubby antenna a friend put on without me seeing haha.
https://sphotos-b.xx.fbcdn.net/hphot...48600482_o.jpg |
Since Monday was my b-day... g/f got me this...
https://sphotos-b.xx.fbcdn.net/hphot...17552139_n.jpg |
thanks for the detailed opinion of the car...I'm looking forward to mine arriving
|
To add on to the first post...
Basically all I really do think the car needs (non-cosmetically) is sticker/wider tires and pads/lines/fluid. Those are the first planned mods besides the pulley that my gf bought me. On the cosmetic side. The tailights and the chrome on them is atrocious. So I plan on getting the lighter tinted overlays from bluebat and then also HIDs for the head lights. Tint and a clear bra should round out the exterior mods for the foreseeable future. |
As small update of sorts... I'll be installing the Perrin crank pulley I have (most likely) this weekend.
Today I also started some ordering... As I stated earlier, my biggest gripe with the car's driving feel is squiahy brake pedal and quickly fading, not very aggressive brake pads.... I plan to remedy this first, with that in mind I made the following purchases today... @Pekingduck had some NIB stainless brake lines for sale - so I picked those up (Thanks again!) I also bought HP Plus front pads and HPS rear pads from @Rev Works (Great to deal with!) I'll be picking up a pint or two of ATE SuperBlue for the street... and a pint or two of Motul RBF600 for track days next year. After looking at the intake design on these cars and thinking $125 + shipping for what amounts to be a giant silicon hose with a 90 degree bend on it... I'll probably make my own intake out of a coupler, a 90 bend, and a pipe with a grommet for the emissions tube - then a drop-in filter for the airbox itself. I figure the $125 + $50 for a cone filter ($175) total could be done DIY for probably about $80 or less. Suspension... Been slowly researching AST, Ground Control, and after asking about AST from a forum memeber... KW as well. I will be going with coilovers, and definitely a set that has dampening adjustability as this will be a double-duty car. On the cosmetic side of things... I plan to order a PnP HID kit of the 5-6k variety and some Bluebat 3/10 tail-light tint. Will also probably buy the Toyote badges for the car since they're fairly cheap... Will also be removing the FR-S badge and put something else in it's place. Researching local places for Window tint and Clear bra as well. Also some wheel-related developments For winter... I'll be selling my stock wheels and tires (there's a thread in the classifieds if you're interested) and taking a set of MKIV VW Avus wheels as they fit without issue (and I have easy access to them), will fit 15in snow tires (which are cheap!) and buying some good snow tires for winter... thread about the Avus fitment here - http://www.ft86club.com/forums/showthread.php?t=19403 Track/Summer I'll be looking into ESM wheels (BBS LM replicas) for my street/3 season wheels - pics of those here http://www.ft86club.com/forums/showthread.php?t=7746 - They're doing a 18x9 square setup now with a +38 offset which should work fine with coilovers. Not sure on tires yet. Also probably going to go with Mach V Awesomes for track wheels... http://www.fastwrx.com/mavawwh.html - light and still 9in wide - which in 17in diameter should leave tire options wide open |
I'm only a couple miles from you. I used to live in Kirkland too.
WA State has some great tracks with Pacific Raceways only a 40 minute drive away. Welcome to WA, hope you brought your rain gear and Vit D supps. :) |
Quote:
You sent me a PM a while back (after my tirade on the real/fake wheel thread) and welcomed me already... But I appreciate it :thumbsup: Can't wait to get this thing out to the track in spring. |
That photo is totally Right click, Set As Desktop Background.
|
The lighter tinted overlays will definately set the car off ;).
B@t™ |
Quote:
Quote:
|
Been getting some interesting PMs regarding the future of this car. I always knew forced induction would be in cards eventually. Looks like sooner rather than later.
|
Quote:
B@t™ |
Quote:
|
| All times are GMT -4. The time now is 01:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.