Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Forced Induction (https://www.ft86club.com/forums/forumdisplay.php?f=78)
-   -   MMMMMM....forged pistons (https://www.ft86club.com/forums/showthread.php?t=18306)

jadewbj 09-26-2012 10:41 AM
MMMMMM....forged pistons
 
Turbo BRZ Forged pistons and Billet Rods.

http://a7.sphotos.ak.fbcdn.net/hphot...93694940_o.jpg

I so want.

armythug 09-26-2012 10:57 AM
Nice :thumbsup:

MattQ-WP 09-26-2012 11:21 AM
What is it about new internals that makes us all go totally Homer Simpson!!

deucethemoose 09-26-2012 11:50 AM
I think really anything made of raw billet makes me drool...

FullBlown 09-26-2012 11:55 AM
Interesting that they went with a straight cap.

ngabdala 09-26-2012 12:37 PM
Jizz in my pants

baldolera 09-26-2012 12:47 PM
Crawford Performance is the ****! + Beam rods ftw!

jadewbj 09-26-2012 12:51 PM
Quote:
Originally Posted by FullBlown (Post 461251)
Interesting that they went with a straight cap.
They said their manufacture had to make special tooling for the angled design, so they did these first so they could start testing sooner.

FullBlown 09-26-2012 01:07 PM
Quote:
Originally Posted by jadewbj (Post 461346)
They said their manufacture had to make special tooling for the angled design, so they did these first so they could start testing sooner.
Is the rod bolts accessible? I know the block does not have access holes to slip the wrist pins in. Looks like Pauter did these, they do good work.

jadewbj 09-26-2012 01:24 PM
Quote:
Originally Posted by FullBlown (Post 461378)
Is the rod bolts accessible? I know the block does not have access holes to slip the wrist pins in. Looks like Pauter did these, they do good work.
Not sure on all that.

Here it is installed.

http://sphotos-a.xx.fbcdn.net/hphoto...93275869_o.jpg

FullBlown 09-26-2012 01:49 PM
looks like the bottom bolt will be a pita to torque to spec. I could be wrong. Was that with the pistons in?

jadewbj 09-26-2012 02:01 PM
Quote:
Originally Posted by FullBlown (Post 461451)
looks like the bottom bolt will be a pita to torque to spec. I could be wrong. Was that with the pistons in?
Not sure, I am no mechanic.

2jzge 09-26-2012 08:24 PM
Quote:
Originally Posted by FullBlown (Post 461451)
looks like the bottom bolt will be a pita to torque to spec. I could be wrong. Was that with the pistons in?
Simple! We rotate the Crank.

JimmyMac 09-27-2012 01:44 AM
Quote:
Originally Posted by FullBlown (Post 461378)
Is the rod bolts accessible? I know the block does not have access holes to slip the wrist pins in. Looks like Pauter did these, they do good work.
I 2nd that. Looks like Pauter rods. I wonder if Carrillo will make some angled caps.


All times are GMT -4. The time now is 12:57 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.