Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

- Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)

- - Front lip question... (https://www.ft86club.com/forums/showthread.php?t=18057)

Front lip question...

Anybody know what front lip is this?

http://www.workwheelsusa.com/media/g...0/900_full.jpg

Thanks in advance!

Would like to know as well. I really like your name man, except mine's starts with an frs. LOL!

Looks pretty good compared to the chargespeed lip, which is thinner.

Looks like the STI lip with an extra thick skirt attached. The one below has the optional rubber one from STI...

Quote:

Originally Posted by switchlanez (Post 456888)

Looks like the STI lip with an extra thick skirt attached. The one below has the optional rubber one from STI...

Hmmm, it might be the STI lip, but the one I posted is a lot thicker on the bottom. I was wondering where did they get the bottom part. Someone needs to ID this front lip. Looks clean compared to the others out there.

Anyway, I found it on the Works wheels website. More pics of it:
http://www.workwheelsusa.com/media/g...0/901_full.jpg

http://farm8.staticflickr.com/7214/7...b780f95a_o.jpg

Quote:

Originally Posted by brz_guy (Post 456899)

http://farm8.staticflickr.com/7214/7...b780f95a_o.jpg

Here are examples of thicker skirts that can be attached just like on the STI lip pictured in the OP:

http://ezlip.com/
http://www.ebay.com/itm/Dura-Flex-Fr...-/220795810145
http://www.ebay.com/itm/Universal-Fr...-/271023329897

Horrible looking thing just waiting to get ripped off at the first speed hump.

Quote:

Originally Posted by switchlanez (Post 456909)

This shot makes me 99% sure it's an STI lip because
1] The emblem in the middle looks like the same size/location as the emblem on the STI lip.
2] I can clearly see the line of separation between the lip and attached skirt showing the lip is the same thickess as the STI lip.

That skirt could just be some generic add-on for front lips because that's what the STI rubber skirt was for my STI lip (I had to chop off quite a few extra inches when installing it because it can be used for other STI lips like for the Impreza).

Here are examples of thicker skirts that can be attached just like on the STI lip pictured in the OP:

http://ezlip.com/
http://www.ebay.com/itm/Dura-Flex-Fr...-/220795810145
http://www.ebay.com/itm/Universal-Fr...-/271023329897

Yes, you are right since I also noticed that the lip without the bottom part is the same thickness as the STI lip. The emblem was a giveaway as well. The emblem in the middle is in the same place as the emblem on the STI lip.

Thanks for the input man. I really appreciate it! :thumbup:

I like those wheels!

^anybody know the white rims on the WRB above?

Quote:

Originally Posted by switchlanez (Post 456888)

Looks like the STI lip with an extra thick skirt attached. The one below has the optional rubber one from STI...

Hey switchlanez,

I've noticed you have the rubber lip extension on your sti lip. I have been procrastinating with putting mine in and would probably get it done this weekend.

Just want to know if you drilled your rubber extension to your lip with the holes and screws provided?

Regards,
Jack

Quote:

Originally Posted by omgwtfbbqsauce (Post 933097)

No, I didn't want to drill holes into my lip. It's held on only by the double sided tape and has held up fine even after getting soaked through washes. I did partially ride up onto a curb while parking and some of it peeled back (still saving my lip from a lot of ugly damage). I pulled it completely off, replaced the tape, and now it's back on.

I want STi rims :bow: