**NEW Spider Vision Headlight Tint only @ Billet Pro Shop**
 

NEW Spider Vision perforated vinyl that sticks to the outer surface
of any light that creates a factory finish smoked effect!

http://i1243.photobucket.com/albums/...0000-20x42.jpg
http://i1243.photobucket.com/albums/...27187303_n.jpg

This new product allows the natural color of your lights to go through
without obstructing it.

It retains less heat than normal tint
and doesn't take away too much of your lights brightness.

http://i1243.photobucket.com/albums/...70213165_n.jpg

Very easy to install due to its shrinking capabilities and once installed
it is maintenance free and easy to clean. If needed removed,
it leaves little or no adhesive residue.

Pricing starts at 65.95 for 20" x 42" FREE shipping.
This is enough vinyl to cover front and rear lights on
most cars. Please measure before ordering!

Check it out! Link here


http://i1243.photobucket.com/albums/...0000-20x42.jpg

TTT, PM for a 10% discount!

Do you know if one 20"x42" sheet of vinyl covers the headlights/taillights/foglights of a FR-S or BRZ specifically, or are multiple needed? Thanks!

tint + hid = problem

Before and after cutoff pics?

I can see normal tint being a problem, but even with the holes? That's why it's a different design, yes?

You would have to measure it roughly and give yourself enough play to be able to wrap them completely. I do not know for certain if one sheet is enough for these cars.

A member has purchased tint and is trying it out on his BRZ (Hentaicle). I'm confident that this tint is compatible with HID's. I have installed it on numerous GT500's with HID's and haven't had any problems!

Ordered a 20x42 sheet for the headlights/reverse lights. I'll get it installed when I get my 3M scotch guard clear bra kit installed. Pictures will ensue.

Here are the comparison pictures of the stock headlight vs. the spyder vision covered headlight. I like how it looks, but the light output was noticeably reduced, so I ended up taking it off. I am still using it on the reverse light cluster.

I can see the Spyder Vision product working well for Mustangs or anything with a vertically flat headlight housing, but on the angled housing of the 86 twins, to me, it's not worth the loss of brightness.

Stock headlight
https://dl.dropbox.com/u/11522/Scion...-headlight.jpg

Spyder Vision covered headlight
https://dl.dropbox.com/u/11522/Scion...-headlight.jpg

Comparison
https://dl.dropbox.com/u/11522/Scion...er-compare.jpg

Billet Pro Shop has excellent products and excellent service, this particular product just didn't work right for the headlights, for my taste.

what about for the rear lights?

Always a possibility but install would be more difficult on these cars.