FA20 Engine component photos from Crawford
 

Is there anything inside your motor you would like us to take a photo of and share here?

Team Crawford

EVERYTHING.

Silly... we have hundreds of photos ;) Name it and we will post it...

:word:

No joke. This would be great. I've seen a few on your facebook page though.

I was wondering what it looks like where the dip stick tube enters the oil reservoir area.
I tried extracting some oil the other day and seem to be hitting some sort of baffle.
Pretty sure the tube was sufficient length.
I saw someone posted about using an extractor successfully to change oil and then someone posted shortly afterward that they used the same product and were unsuccessful.

I'm thinking there must be some sort of interference that could complicate this method.
Any information would likely be of some benefit....

The dipstick passes through the lower part on the left of this photo, theirs lots of stuff to run into ;)

How about under the valve covers?

Valve cover off

How do the spark plugs look during your teardown? And do you think its accessible without lifting the engine?

They are an easy removal, but have a 14mm hex. They are a triple electrode design.

Team Crawford

Thank you for this! Please post as many pictures as you can.

This thread is like Jalopnik's "Ask 'so-&-so' anything", but only FR-S/BRZ! This is way too awesome! Thanks for posting the photos & answering!

If I may request few

1. How does intake manifold inside look? Also is it smooth? Any oil?
2. Motor mount/s & the area?
3. Inside the oil pan
4. Crankshaft & crankshaft bearing

Thanks

any way we could get a zip file of all the pictures you have? I dont need anything specifically right now but I could see that being VERY useful at some point.

x2

I'm sure I'll break shit