This is exactly what Im looking for. Looked quickly through the threads posted so far an didnt see the group buy.


Was there any of these left? Anyone have any info on what happened with it?

Ha. Funny the last post here was me... well I couldnt find them in bronze and wound up with, what I was told was, the last set of this size/finish left that Rays even had.

17x9+35 wrapped in 235/45 BF Goodrich Sport Comp 2's. Fortune Auto FA500 coilovers.

https://scontent-ord1-1.xx.fbcdn.net...aa&oe=57B80DB1

How much are you dropped?

I had forgotten to measure clearance before doing the coilovers, so I couldnt even tell you :/

I've been trying to find a stock one in my area to compare it to.

I feel you, I bought my car with coils and I didn't know how much it was lowered, but I found a thread that someone posted stock measurements and where they measured from, I forgot what the measurements were, but i do know I'm lowered 2 inches front and back. I'm just curious to see what these wheels would look like that low. I'll see if I can find the stock measurements.

Edit: I remembered I jotted them down on a notepad. For the front stock height was 26.5 inches and the rear was 27 inches, not all the measurements were exactly the same in that thread if I remember correctly but they were all within a half inch of each other. This was also measured from the top center of the fender to the ground for both the front and back. If you measure do it on flat even ground. Also I think side to side isn't exactly the same, but I didn't measure side to side myself, just front and back.

Ahh with that in mind you'd have to take tire size into consideration. I figured TDC of the wheel well arch to some point of the hub would be a good measuring protocol. That is if people aren't going crazy with their caster lol.

But by this standard I'm 1&3/4 in the front and 2&1/8 in the rear. Could be right I guess.

Ah yes you're right about tire size, completely forgot that could affect it, Im still on stock wheels so I completely disregarded that haha. But I assume as long as you keep the same diameter it would be close to the same.


Sent from my SAMSUNG-SM-G920A using Tapatalk

Any rubbing issues? I love the way your car sits and I'm looking to do the same wheel but with a 255 tire instead.

Sent from my SAMSUNG-SM-G920A using Tapatalk

Diiamn. 255 eh? I might rub if I were on 255's while on track lol.

Im planning on going 245/40 when I can afford tires here.

Thanks for the complement though man :thumbsup:

Yeah I dont plan on tracking the car too much just the occasional autocross here and there, not 100% set on 255, will probably end up with 245. Just going around seeing what other people are running. And no problem dude.

Sent from my SAMSUNG-SM-G920A using Tapatalk