Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 11 of 13 « First 78910 11 1213
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)
-   -   Wheel Directory: Gram Lights 57DR 17x9.0 +35 (https://www.ft86club.com/forums/showthread.php?t=17242)

RavSpec 12-09-2013 02:43 PM
Quote:
Originally Posted by sklimo (Post 1378456)
Picked up my 18x9.5 +38 57DR's in gunmetal friday!!! Hurry up spring!!
nice , post pictures ! but u got the 18x9.5 spec ... so kind of off topic.

sklimo 12-09-2013 03:12 PM
Quote:
Originally Posted by RavSpec (Post 1378577)
nice , post pictures ! but u got the 18x9.5 spec ... so kind of off topic.
LOL I found the correct thread!!!

Herndon 04-02-2014 01:53 PM
would really love to see a set of 17's in the magnesium blue

spitfire481 04-02-2014 07:27 PM
Ordered my set of 17x9 et35 gun blue from @RavSpec Monday night. My 255/40/17 nitto nt05's arrive tomorrow. Hopefully the wheels not to long after

spitfire481 04-04-2014 02:44 PM
huge thanks to @RavSpec . ordered my wheels late monday night, they arrived to me this morning (friday). tires came from discount tire thursday. supposed to mount them up next monday night so pics will follow.

17x9 et35 gun blue 57dr's with 255/40/17 nitto nt05's. i run about a 1-2 finger wheel gap and -2 camber up front and -2.5 rear. should sit almost the same as my current 18x9 setup so i think ill be good. if not it might take another half degree of camber up front but i doubt it

http://i3.photobucket.com/albums/y51...psn7izc08u.jpg

http://i3.photobucket.com/albums/y51...psyemsgscj.jpg

http://i3.photobucket.com/albums/y51...psivurvss2.jpg

my other setup:
18x9 et30 fifteen52 forged f40 tarmacs with 245/35/18 ventus v12

http://i3.photobucket.com/albums/y51...psktdjsfeo.jpg

http://i3.photobucket.com/albums/y51...psn7eqw31k.jpg

Cards2323 04-04-2014 02:55 PM
I just picked up my gold set from them today but I wont be putting them on for a month or so..

Kevstra 04-08-2014 04:04 PM
Quote:
Originally Posted by Imrac (Post 1078222)
Got them installed, there is about 1 finger clearance between the lower spring perch and the wheel/tire. I don't think you will have any clearance issues. Lock to Lock I don't see any problems either. (Uncompressed anyway). I think it may rub the fender liner if compressed at full lock, but I am not sure of too many driving conditions when that would happen.

I may try and compress the front to see if there are any fender clearance issues, but I think it is looking good.

FYI, I am running only -0.7 degrees camber in the front (using crash bolts). Thats all I could get out of one of the sides while the other side would go to a little over a degree.

Here is the best picture I could take of the clearance between the wheel/tire and the springs (Top of tire, looking down)

http://i21.photobucket.com/albums/b2...ps9e16887d.jpg

This is 17x9 +35 with a 245/40 tire (Hankook Evo V12)
Hey Imrac, do you have any pictures of how the 17x9 57DR's look on the RCE yellow springs? That's looking like the exact setup I want.

spitfire481 04-08-2014 07:23 PM
17x9 et35 from @RavSpec
255/40/17 nitto nt05
1-1.5 finger gap all around
-2 front camber, -2.5 rear
Black center caps are also on the way before someone comments haha

http://i3.photobucket.com/albums/y51...psouahgy3u.jpg

http://i3.photobucket.com/albums/y51...pszacikhpa.jpg

http://i3.photobucket.com/albums/y51...pszqn3cwfo.jpg

CrazyWookiee 04-21-2014 02:26 AM
Gramlights 57DR Review & Weight
 
Just did another video review and unboxing of 57DR.
Size: 17x9.
Weight: 20.2lbs

[ame="https://www.youtube.com/watch?v=W-Gfxm7YH6U"]Gramlights 57DR Review and Weight - YouTube[/ame]

spitfire481 05-19-2014 12:50 PM
17x9 et35 255/40/17 nitto nt05

https://farm3.staticflickr.com/2925/...86dfb360_b.jpg

https://farm3.staticflickr.com/2902/...4fc68fee_b.jpg

https://farm8.staticflickr.com/7442/...8e73faa9_b.jpg

https://farm8.staticflickr.com/7361/...0f8213a5_b.jpg

steveoexige 05-19-2014 01:35 PM
Quote:
Originally Posted by spitfire481 (Post 1649061)
my other setup:
18x9 et30 fifteen52 forged f40 tarmacs with 245/35/18 ventus v12

http://i3.photobucket.com/albums/y51...psktdjsfeo.jpg

http://i3.photobucket.com/albums/y51...psn7eqw31k.jpg
Best wheels I've seen yet. Then again at a thousand bucks a piece they should shit golden eggs for breakfast too.

fooddude 05-19-2014 02:56 PM
@spitfire481: Very clean and nice!

amazingbrz 10-06-2014 03:58 PM
Hey Dude, Nice setup :thumbup:

I actually have the exact same Tire/Wheel setup on gold, but Havent gotten a chance to put on coils yet.

Just wondering How the fitment and ride is? and if you had to roll your fenders to make it fit?

Thanks Man

RavSpec 01-11-2015 09:32 PM
Started another GB (7th round) with Mag blue, gold and the new matte bronze finish on 17x9 +35 57DR :)


All times are GMT -4. The time now is 03:18 PM.
Page 11 of 13 « First 78910 11 1213
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.