Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 49 of 118 « First 3945464748 49 505152535999 Last »
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   My Shift Knob. Post yours too (https://www.ft86club.com/forums/showthread.php?t=17153)

jono_l 01-04-2014 04:26 AM
Quote:
Originally Posted by HRTROB (Post 1427312)
Used a red crayon to fill the TRD engraving of my TRD knob :)

http://i374.photobucket.com/albums/o...ps00f34216.jpg
How/where did you get the red backlit TRD start button? Everywhere else I've looked suggests that the TRD start button lights up green - that's what put me off buying one so far.

HRTROB 01-04-2014 04:54 AM
Quote:
Originally Posted by jono_l (Post 1429225)
How/where did you get the red backlit TRD start button? Everywhere else I've looked suggests that the TRD start button lights up green - that's what put me off buying one so far.
I disassembled both the stock and TRD units and swapped the button caps.

jono_l 01-04-2014 04:59 AM
Quote:
Originally Posted by HRTROB (Post 1429242)
I disassembled both the stock and TRD units and swapped the button caps.
Thought that might've been the case! Was it a difficult job - I.e. cutting required? Or do they simply pry apart?

Sent from my Nexus 5 using Tapatalk

HRTROB 01-04-2014 05:13 AM
Quote:
Originally Posted by jono_l (Post 1429246)
Thought that might've been the case! Was it a difficult job - I.e. cutting required? Or do they simply pry apart?

Sent from my Nexus 5 using Tapatalk
It wasn't difficult at all. No cutting required. You just have to be carful and patient when you pry open the tabs. Only tool needed is a small jewelers flat screwdriver

texasbound972 01-06-2014 12:11 AM
1 Attachment(s)
Flossy heavyweight

Sent from my SAMSUNG-SGH-I537 using Tapatalk

Nevermore 01-07-2014 05:14 PM
Quote:
Originally Posted by OrangeJuleas (Post 1015589)
Just got mine from WC Lathe Werks. You all were right, dealing with Chris was super easy and he really took the time to help me plan the design and look that I wanted. Not only does it look awesome, but feels great too. I would recommend them to anyone!
Sorry to quote you on such an old post, but the more I see this knob the more I kind of want it. Do you remember how much it cost you?

OrangeJuleas 01-07-2014 11:37 PM
Quote:
Originally Posted by Nevermore (Post 1436269)
Sorry to quote you on such an old post, but the more I see this knob the more I kind of want it. Do you remember how much it cost you?
You mean exactly like it (Gone in 60 seconds style), or just the basic knob (the copolymer sphere)?

Nevermore 01-08-2014 11:31 AM
Quote:
Originally Posted by OrangeJuleas (Post 1437105)
You mean exactly like it (Gone in 60 seconds style), or just the basic knob (the copolymer sphere)?
Exactly like it. I don't know why but I like that go baby go knob.

OrangeJuleas 01-09-2014 01:20 AM
Quote:
Originally Posted by Nevermore (Post 1437764)
Exactly like it. I don't know why but I like that go baby go knob.
I think it was about $120, for the custom engraving, the knob and the additional work at the bottom (there are engraved circles you can't see). It is about the same size as the stock shift knob. I have several knobs, but this is the one I'm using now and it always turns heads without being gaudy.

Sharki 01-09-2014 09:14 AM
Quote:
Originally Posted by evox2frs (Post 1358792)
I know it's been posted before, but just installed the TRD knob this week, and really liking the look and feel of it. It's not technically the "JDM" one, but for $37 shipped I couldn't resist.


http://i249.photobucket.com/albums/g...ps671b41c0.jpg

Hi,

Where did you get this one for this price ? it's seems very good !

Did you have some issue some time after ?


Thanks

Andrew025 01-09-2014 09:27 AM
Quote:
Originally Posted by Sharki (Post 1440346)
Hi,

Where did you get this one for this price ? it's seems very good !

Did you have some issue some time after ?


Thanks
Ebay

evox2frs 01-09-2014 09:21 PM
^ Yep, eBay, and no issues at all. Looks perfect, and feels better too. After lots of searching, I saw the "JDM" TRD knob ships in the same box labeled "made in Italy". So no sense in spending over $100 more

hotpanda1 01-12-2014 12:27 AM
1 Attachment(s)
Got my Raceseng slammer shift knob in the other day, it's so awesome

1ofaKind 01-12-2014 01:29 PM
1 Attachment(s)
Heres my ARC Brazing Titan Shift Knob:thumbup:


All times are GMT -4. The time now is 09:54 AM.
Page 49 of 118 « First 3945464748 49 505152535999 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.