Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   FT-86 SpeedFactory - V1 Cat Back Exhaust - Your feedback wanted! (https://www.ft86club.com/forums/showthread.php?t=16431)

FT-86 SpeedFactory 09-04-2012 01:21 AM

FT-86 SpeedFactory - V1 Cat Back Exhaust - Your feedback wanted!
 
FT-86 Speed Factory has been working on this exhaust for a couple weeks now. We have got this version to a beta test stage and have been driving around with it for the last week. We will be racing with it at the SCCA Solo Nationals this week and then take it into production.

We set out to build this version to be the exhaust that won't annoy the girlfriend or yourself, won't attract attention from the police, and frankly be something that can be used in a daily driver / weekend warrior car. You hear the exhaust when you want to, by letting the RPM's wrap out with your foot firmly on the floor, and don't hear it when cruising at 3000 RPM down the highway. It is also not overly loud when shifting normally on your morning commute to work. To keep the ruckus down during normal driving we had to use a heavier muffler. Testing showed us that the lighter mufflers increased noise in the RPM ranges for daily commutes and is not something we wanted in our V1 system. We will have lighter exhausts for our V2 and V3 due out later this year. The number one goal for the V1 is sound and daily drive-ability, and I firmly believe that has been accomplished here.

V1 BETA SPECS:
2.5" T304 Stainless Catback to Mufler
Minimal bends, as straight as possible
3.5" Stainless Angle Cut tips ( possible 4" on finial version you help decide )
Made in the U.S.A
V-Band Clamp for rear section
Up to a 7 Wheel HP Gain in the RPM range
Up to a 3 FT LB in Torque Gain in the RPM range
Doesn't annoy the Girlfriend / Wife

We are looking for your feedback to help make this exhaust one of the best out there for a daily driver / weekend warrior.

Pics
http://ft86speedfactory.com/images/ft86sfexhaust.jpg

http://ft86speedfactory.com/images/ft86sfexhaust1.jpg

http://ft86speedfactory.com/images/ft86sfexhaust2.jpg

http://ft86speedfactory.com/images/ft86sfexhaust3.jpg

http://ft86speedfactory.com/images/ft86sfexhaust4.jpg

Videos

Start up and rev from exterior
[ame="http://www.youtube.com/watch?v=nhjkOvByLSI"]FT-86 Speed Factory V1 Exhaust - YouTube[/ame]

Drive by from exterior
[ame="http://www.youtube.com/watch?v=4175rHkAkAs"]FT-86 Speed Factory V1 Exhaust - Drive By - YouTube[/ame]

Interior video of launch and full throttle
[ame="http://www.youtube.com/watch?v=wmcj_SqTGmw"]FT-86 Speed Factory Catback Exhaust V1 - Launch - YouTube[/ame]

Interior video of normal driving conditions
[ame="http://www.youtube.com/watch?v=d7EAYQDPYDE"]FT-86 Speed Factory V1 Exhaust - Inside Driving - YouTube[/ame]

Dyno Video ( 4th gear )
[ame="http://www.youtube.com/watch?v=h8munnC0YHs"]FT - 86 SpeedFactory Scion FR-S dyno of our V1 exhaust - YouTube[/ame]

Dyno Chart ( 4th gear )
http://ft86speedfactory.com/images/ft86sfexhaust5.jpg


Lee358 09-04-2012 01:27 AM

hm not to bad guys i think for what it is it sounds like a good solution cant wait to see your lighter louder v2 and v3 see if you can bump that 7hp up a bit.. also 4in tips :thumbsup:

WolfsFang 09-04-2012 01:46 AM

this sounds amazing, i think this is an amazing exhaust for DD for the avg person. Now i hope your V2 or V3 will just be straight with no big muffler like the SRT end (if that makes sense)

Lee358 09-04-2012 01:51 AM

ohh! almost forgot Price Matters!

brichard0625 09-04-2012 03:30 AM

hmmm....i like it...and 4inch tips

FT-86 SpeedFactory 09-04-2012 09:46 AM

I must be getting old. I thought the 3.5" were pretty solid. :)

We'll get some photos up with 4" tips ASAP.

JoeBoxer 09-04-2012 10:11 AM

4" for sure but otherwise looks good.

brichard0625 09-04-2012 10:24 AM

Quote:

Originally Posted by FT-86 SpeedFactory (Post 420696)
I must be getting old. I thought the 3.5" were pretty solid. :)

We'll get some photos up with 4" tips ASAP.

3.5 still looks good but i think it looks a little more aggressive when the exhaust gaps are filled up a little more.

ngabdala 09-04-2012 10:26 AM

3" piping 4" tips :)

drifter 09-04-2012 02:21 PM

was everything else stock in those videos besides the exhaust?

YoKeutla 09-04-2012 02:30 PM

Quote:

Originally Posted by drifter (Post 421041)
was everything else stock in those videos besides the exhaust?

Yes, stock baseline then nothing but the cat-back was installed.

Car has approximately 2500 miles, I believe.

EDIT: Not sure on all the videos! Just the Dyno. There may have been a drop-in filter installed on the other videos. I will let JB respond to that.

RE-EDIT: Just asked JB and the car was in-fact all stock minus the cat-back exhaust.

ATL BRZ 09-04-2012 02:45 PM

Really like the sound of this one!! Looking forward to pricing and I'm voting for 4" tips please!!

Hotlava86 09-04-2012 03:44 PM

Jeremy! i want mine! i'll test it for you and post an AWESOME review!

JSK 09-04-2012 07:58 PM

They said it is a "heavier muffler" compared to other systems but does anyone know the actual weight or how it compares to stock?


All times are GMT -4. The time now is 10:58 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.