The Shop CT's 2013 SSM Subaru BRZ Limited.
 

So over the last few months we have been very preoccupied with our 9Sec (Soon to be 8Sec) Shop GTR. Now that we have gotten to a point in that project where we have some time to focus elsewhere, we have decided to go back to our roots (Subaru). With that said, we purchased a brand new 2013 Sterling Silver Metallic Subaru BRZ Limited. We are planning to broaden the horizons for HP & TQ gain's while maintaining the amazing handling that the BRZ comes with from the Factory.

We have already started taking measurements for the Turbo Kit as well as ordered "Basic" Suspension components. Our intention is to apply each product (Springs, Swaybars, Endlinks, and then switch to Coilovers) to identify what works best. I will keep everyone informed on updates as we progress our way through this project.

Here are some Photo's so far...

Added: 18x8 +48 OZ Superleggera's & Eibach Springs.
http://i528.photobucket.com/albums/d...488/photo2.jpg
http://i528.photobucket.com/albums/d...488/photo1.jpg
http://i528.photobucket.com/albums/d...4488/photo.jpg
The BRZ Baseline 158hp
http://i528.photobucket.com/albums/d...80016954_o.jpg
Before / After - Baseline vs. The Shop Stage 1 Tune
http://i528.photobucket.com/albums/d...41004060_o.jpg

Let us know what you think!

Shane@TheShopCT

*Update* Our friends over at Turn 14 and Perrin Performance hooked us up with a Catback Exhaust System. Unfortunately I was on my way out so I didn't get a sound clip yet for you guy's but I was able to snap some pictures of the product and the install.

So first thing's first we removed our Factory Exhaust System.
http://i528.photobucket.com/albums/d...8/IMG_1650.jpg
http://i528.photobucket.com/albums/d...8/IMG_1651.jpg
Here is the complete system (Out of the car)
http://i528.photobucket.com/albums/d...8/IMG_1652.jpg
*Notice* The Factory Exhaust System has a "pinch" just past the res for clearance.
http://i528.photobucket.com/albums/d...8/IMG_1653.jpg

Now that our Factory System has been removed we opened our Package from Perrin to find...
Perrin's Catback Exhaust System
http://i528.photobucket.com/albums/d...8/IMG_1644.jpg
Complete with Hardware and V-band clamps
http://i528.photobucket.com/albums/d...8/IMG_1645.jpg
As well as all the little goodies they send you ; )
http://i528.photobucket.com/albums/d...8/IMG_1649.jpg
Here are a few "close up" shots of the exhaust
http://i528.photobucket.com/albums/d...8/IMG_1646.jpg
http://i528.photobucket.com/albums/d...8/IMG_1647.jpg
http://i528.photobucket.com/albums/d...8/IMG_1648.jpg

Now it's time for the install.
http://i528.photobucket.com/albums/d...8/IMG_1654.jpg
Properly test fit
http://i528.photobucket.com/albums/d...8/IMG_1654.jpg
Then Fasten V-Band Clamp
http://i528.photobucket.com/albums/d...8/IMG_1656.jpg

After all clamps have been sealed and hangers adjusted here are a few shot's of how the exhaust sit's on the outside of the car...
http://i528.photobucket.com/albums/d...8/IMG_1661.jpg
http://i528.photobucket.com/albums/d...8/IMG_1660.jpg
http://i528.photobucket.com/albums/d...8/IMG_1659.jpg

We will make the proper tuning adjustment's tomorrow and I will also get a sound clip for you guy's as well.

P.S. Headers & Over Under Pipe are in the Mail ; )

Here is a brief Video Clip of the Perrin Exhaust at Start-up and Rev.
http://i528.photobucket.com/albums/d...h_IMG_1667.jpg

-Shane-

*Update* UPS Delivering their daily dosage of happiness wrapped in cardboard...
http://i528.photobucket.com/albums/d...8/IMG_1674.jpg
As expected, our Injen Intake for the BRZ has arrived!
http://i528.photobucket.com/albums/d...8/IMG_1675.jpg
Now a complete shot of all the parts included.
http://i528.photobucket.com/albums/d...8/IMG_1676.jpg
Injen did a great job w/ Wrinkle Black finish. It adds a "humble presence" in the engine bay.
http://i528.photobucket.com/albums/d...8/IMG_1677.jpg
Again for the craftsmanship...
http://i528.photobucket.com/albums/d...8/IMG_1678.jpg
One more for good measures!
http://i528.photobucket.com/albums/d...8/IMG_1679.jpg

I have to leave the shop early today so, the "install" and "finished product" pictures will have to wait till tomorrow.

Let us know what you guy's think!

-Shane-

Are you guys going to dyno the exhaust and intake after install?

Any fitment issues with the Perrin exhaust? I'm on the less experienced side of things and am worried about having to do alterations for it to sit flush. Nice build BTW!

Yes, I am just about to post it:party0030:

-Shane-

So unfortunately yesterday I was unable to make it to the shop. Never the less, I walked in this morning to lots of progress made on the BRZ. I was unable to get the step by step photos of the Intake install but I made sure to take photo's that would show the products fitment in the vehicle.

Injen Intake.
http://i528.photobucket.com/albums/d...8/IMG_1685.jpg
Overhead shot (showing fitment with pulley's).
http://i528.photobucket.com/albums/d...8/IMG_1687.jpg
Close up of the box.
http://i528.photobucket.com/albums/d...8/IMG_1684.jpg
Again, Perfect fitment by Injen. (They did a great job with this product).
http://i528.photobucket.com/albums/d...8/IMG_1686.jpg

Now finally I have a Dyno Graph for you guy's based on the last 4 modifications we have done and the tuning in between.

Run 2(Red) - Stock
Run 12(Blue) - Tune Only (ECUTek)
Run 19(Green) - Tune w/ Catback Exhaust (Perrin)
Run 27(Purple) - Tune w/ Catback Exhaust & Intake (Perrin/Injen)
http://i528.photobucket.com/albums/d...8/IMG_1683.jpg

Teaser for next week...(Lachute & Agency Power Header Showdown, Then E85 N/A Map)

**violation** Sales and Services are not allowed for your handle.

-Shane-

Perrin did a great job with this product. It fit perfectly, everything is nice and flush. They also offer these "ring clamps" that come with the exhaust and that allows the user to adjust the fitment of the tips on the hangers.

No doubt a great Product, Also thanks for the compliments BoxeRZ:happy0180:

-Shane-

Free dyno day? I'm there! I'll install my Injen on the spot.

Nice i was just going to ask about a dyno and then saw free dyno day. I will def be there that day. :D

Sounds Good :happy0180:
-Shane-