Accelerated Performance BRZ-400 - Visconti Tuning
 

New HP record. Will post graph!


See graph below.

Current configuration Change:
E85
Deatschwerks 900cc Injectors
Deatschwerks 65 Fuel Pump
Garrett 3076



We are testing clutch options with exedy. The configuration now holding is listed below. We have slip starting around 250-260ftlbs. We will need to upgrade the cover as well. For someone only wanting a 93 Octane 300hp setup, this clutch would work great.

Its very cost effective.

Exedy Lightweight Flywheel
Exedy Hyper Single Clutch Disc
Stock Clutch Cover

Nuh uh. Oh no, you di-nt.

Nice :thumbs:

Attachment 13728

Needs more clutch!

:eyebulge: Way more than I need but it is good to see you guys pushing the envelope.

will there be any vids of the dyno runs guys?

Yup.. Got one

This is a 6MT right?

Nothing is impossible! Well done guys.

Awesome work, must be something rather special to drive.

While I really like to see high HP builds like this, I'd love to see something along the line of a GT2560R in there, throttle response would be off the charts!!! I miss my 1.6 miata with a 2554R for that reason.

Looks like a larger turbo? HP looks to be coming much later.

What are the supporting mods?!!!?!?!? is it E85?

Awesome results mate, well done

Whats the mod list to get this result ?

Still running the good old potato or the turbo has been upgraded ?

Also is this e85 ?

lol, great stuff guys.

looking forward to seeing some videos and details in the future, excellent stuff

sick!!

EVERYONE MUST "LIKE" THE DYNO GRAPHS FOR MORE DETAILS.
perhaps that will encourage a bit more from these fellas. :D

Good lord where is the horsepower race going to stop

How many cc injectors???

400? 100 per cylinder o.0

I believe the car has 700cc injectors

Good lord I hope wheels and tires are replaced before this thing sees the road.

This car has DW900s in it...

I have a set of SIR1200s just Incase

still stock internals??

He said previously he wasn't going to change anything unless he had to, so I think so..

There's a new clutch I think.

we need details.
how much boost?
what supporting mods?
E85 or 93 oct?

pure sickness!!!

moar details!!!!??

Every time I see these threads I start laughing. I love how you guy are getting such a ridiculous amount of power out of this engine.

:happyanim:

Awesome congrats
here have you been? he started with a gt28r

No way a disco can make 400whp

New Pucker Factor record as well. Do you have a graph for that? Anyway to display it on the dyno sheet? :respekt:

And the stock internals still hold, i really want to see what it takes to break this motor.

If this is Don's car, which I assume it is, it definately has a new clutch in it.

That's why "I thought". I know he melted his last one and got a replacement, but I wasn't 100% sure if this was his car.

Congrats!

Don, Windows 7 gives +45whp.

Sent from my Nexus 7

Now.. for some reliability testing haha. 400hp seems like it would put too much stress on the engine.

Nice work!

Don has a upgraded clutch .. And it's not up for the task

holy moly...

that means really ALOT POWA! )

Keep it up!

This still on the GT28RS?

*edit* missed the 3076 remark. Which A/R for the exhaust side?

The new clutch die already :S