Konig Hyperspec
 

Konigs releasing a few new wheels in 2025 and the Hyperspec is one of them.
They are offering them in two sizes in 5x100, 17x8 +40 and 17x9 +40.
Two colors available, bronze and anthracite.

I ordered a set in 17x9 in anthracite. I was told by Konig they start shipping to distributors around mid June, I'll update once I have them in my hands.

https://i.imgur.com/fBZzB1V.jpeg
https://i.imgur.com/3mV1ule.jpeg
https://i.imgur.com/Uu09hys.jpeg
https://i.imgur.com/f48MzM7.png
https://i.imgur.com/MJ9xvTN.jpg

Love em! any weights for the 17x9?

Very pretty!
Wondering how they fit over a Brembo BBK?

Good question, might be worth an email, they were pretty quick to respond when I asked about availability prior to ordering. I have a friend with brembos, can see if things line up to test fit one.

They have not posted any weights or responded to my question yet. I'll weigh mine when I get them. Their media material they posted have suggested it is one of their lightest offerings.

They are listing 18.07lbs for 17x9 on website
17.19 for 17x8

Not terrible, about half pound heavier than hypergrams.
1.5-2 pound heavier than my RPF1s, but worth the trade off imo.

agreed i have hypergrams but I would consider these as they are still light compared to most wheels out there

After much delay I finally took delivery of my set today and had them mounted.

Konig makes these in a face "A" and "B" design. Similar to the RPF1s which alter the angle of the spokes.
Konig advertise the face B but majority of the wheels sold are face A, including both 17x8 and 17x9 fitment for the twins.

https://i.imgur.com/Gngvv2E.jpeg

With that out of the way, pics!

Mounted with 245/40R17 Conti ecs02

https://i.imgur.com/FLCgf4o.jpeg
https://i.imgur.com/CppSKkl.jpeg
https://i.imgur.com/Vl4X3kz.jpeg
https://i.imgur.com/Oqv4WYN.jpeg

I was eyeing the same wheels so thanks for keeping us updated!