What are these connectors, DAB?
 

https://drive.google.com/file/d/1uRX...usp=drive_link
https://drive.google.com/file/d/1uRX...ew?usp=sharing
https://drive.google.com/file/d/1uRX...ew?usp=sharing

https://drive.google.com/file/d/1uRX...QpG8Auk4T/view
i just fitted my first headunit its a kenwood 5020DABS.


Its all working how i want it apart from my window stuck on DAB aerial and OEM mic. now i understand i will have to replace the mic as its connected into the main harness and the HU has small jack plug.


But the DAB aerial i assumed would fit but clearly does't, the only 2 cables left over are in the picture above, am i right in thinking the black one is the GPS and the white one is my DAB? obviously the connector wont fit my new HU is there a converter or can i take the white plug off and see if it fits in the DAB hole.



I have a 2019 GT86 Club series blue.



Thankyou.

To use OEM mic with sense and shield:
- supplied 5V to 28-pin pin 4 pink wire using 5V from a USB A male cable connected to HU
- add 3.5mm jack + to 28-pin pin 5 brown wire https://www.amazon.com/dp/B0BVPTFJN5
- add 3.5mm jack - to 28-pin pin 19 black wire

My vehicle is a 2014, and the OEM connectors for GPS and antenna do not resemble those of your 2019.



Possibly helpful: there are 3 pins active for the shark fin radio antenna (+,-, and 12V ant power), and only 2 pins used for GPS antenna.

i will take a look at this, its really helpfull thankyou. as for the DAB i think i will just refit a replacement as its thrown me a little. the white connector does go off to the left over the glove box so i just assumed thats what it was, if it cant be converted ill just buy another stick on windscreen jobby.