|
Oil cooler install question
So I installed a mishimoto oil cooler. I attached a photo of how I had to install the left fitting to the sandwich plate. I had to have it facing upwards as my turbo is in the way. All the photos ma I’ve seen have it point down. I don’t think this should matter, just want to get someone who is experienced opinion.
Sent from my iPhone using Tapatalkhttps://uploads.tapatalk-cdn.com/202...231ac855e6.jpg |
|
|
Direction the hose points won't matter. System is pressurized
Sent from my KB2007 using Tapatalk |
The direction does not matter. Make sure you torque those banjo fittings correct and you may want to drill them and safety them. Banjo fittings do not perform well with a lot of movement.
|
Seems fine. Just make sure the tension in the hoses tends to pull the fittings toward the tightening direction
|
Thanks for the piece of mind, fellas
Sent from my iPhone using Tapatalk |
| All times are GMT -4. The time now is 11:32 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.