Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   BRZ First-Gen (2012+) — General Topics (https://www.ft86club.com/forums/forumdisplay.php?f=23)
-   -   Does this sound like clutch chatter? (https://www.ft86club.com/forums/showthread.php?t=154090)

Howaitoguru 10-12-2023 11:15 AM
Does this sound like clutch chatter?
 
So this is my 3rd clutch I’m at 108k miles I got a southbend stage 2. Before I had an ACT Street kit. And before that was stock. I can’t tell if this is normal clutch chatter or if it’s TOB noise. https://streamable.com/9fn8fj

Joveen 10-12-2023 11:28 AM
Quote:
Originally Posted by Howaitoguru (Post 3594475)
So this is my 3rd clutch I’m at 108k miles I got a southbend stage 2. Before I had an ACT Street kit. And before that was stock. I can’t tell if this is normal clutch chatter or if it’s TOB noise. https://streamable.com/9fn8fj
It doesn't really sound like it. Do you have the same sound at idle?

Sent from my SM-F936U1 using Tapatalk

Howaitoguru 10-12-2023 11:45 AM
Quote:
Originally Posted by Joveen (Post 3594476)
It doesn't really sound like it. Do you have the same sound at idle?

Sent from my SM-F936U1 using Tapatalk

Nope. Just when I drive. As soon as I push the clutch in it goes away. I just hope i don’t have to replace it again.


Sent from my iPhone using Tapatalk

Joveen 10-12-2023 11:54 AM
Might be throwout bearing fam.

Sent from my SM-F936U1 using Tapatalk

Howaitoguru 10-12-2023 11:55 AM
Quote:
Originally Posted by Joveen (Post 3594479)
Might be throwout bearing fam.

Sent from my SM-F936U1 using Tapatalk

I’m going to be pissed this will be the 3rd time I have to replace it due to TOB


Sent from my iPhone using Tapatalk

Tokay444 10-12-2023 12:07 PM
Did you replace the front bearing retaining cover at either of the 2 other clutch jobs?

blsfrs 10-12-2023 12:36 PM
If you could, try to get a better recording of the sound. Maybe I'm old and my hearing ain't what it used to be, but I couldn't hear anything other than engine and air noise.

Also, a bad TOB usually makes the most noise with the clutch pedal depressed.

Howaitoguru 10-12-2023 04:29 PM
Quote:
Originally Posted by Tokay444 (Post 3594481)
Did you replace the front bearing retaining cover at either of the 2 other clutch jobs?

A shop did it so not sure.


Sent from my iPhone using Tapatalk

Tokay444 10-12-2023 04:30 PM
Quote:
Originally Posted by Howaitoguru (Post 3594493)
A shop did it so not sure.


Sent from my iPhone using Tapatalk
Is it on your receipt of parts?

Howaitoguru 10-12-2023 04:32 PM
Quote:
Originally Posted by blsfrs (Post 3594483)
If you could, try to get a better recording of the sound. Maybe I'm old and my hearing ain't what it used to be, but I couldn't hear anything other than engine and air noise.

Also, a bad TOB usually makes the most noise with the clutch pedal depressed.

Unfortunately my car has catless headers and a catback exhaust so it’s going to be loud. The only way I can make the noise is when driving. It doesn’t make it at idle. It kind of sounds like rattling kind of like a maraca which makes me think it’s just clutch chatter but idk. It also only happens in higher gears.


Sent from my iPhone using Tapatalk

Howaitoguru 10-12-2023 05:29 PM
Quote:
Originally Posted by Tokay444 (Post 3594494)
Is it on your receipt of parts?

Flywheel, release arm spring, Release Brg. Clip, that’s it. Says Remove and replace clutch, customer has aftermarket flywheel, clutch fork, and pivot, inspect upon removal. Replace if necessary. The one before that says remove and replace clutch, clutch fork, pivot and springs, and flywheel. Has the same parts. I currently have a Stage 2 Daily kit from south bend.


Sent from my iPhone using Tapatalk

Tokay444 10-12-2023 05:54 PM
Quote:
Originally Posted by Howaitoguru (Post 3594496)
Flywheel, release arm spring, Release Brg. Clip, that’s it. Says Remove and replace clutch, customer has aftermarket flywheel, clutch fork, and pivot, inspect upon removal. Replace if necessary. The one before that says remove and replace clutch, clutch fork, pivot and springs, and flywheel. Has the same parts. I currently have a Stage 2 Daily kit from south bend.


Sent from my iPhone using Tapatalk
Sounds like 3rd time will be the charm then.

Tokay444 10-12-2023 05:55 PM
Quote:
Originally Posted by Howaitoguru (Post 3594495)
Unfortunately my car has catless headers and a catback exhaust so it’s going to be loud. The only way I can make the noise is when driving. It doesn’t make it at idle. It kind of sounds like rattling kind of like a maraca which makes me think it’s just clutch chatter but idk. It also only happens in higher gears.


Sent from my iPhone using Tapatalk
How many headers you manage to get on there?

Howaitoguru 10-12-2023 05:57 PM
Quote:
Originally Posted by Tokay444 (Post 3594499)
How many headers you manage to get on there?

Are you trolling?


Sent from my iPhone using Tapatalk


All times are GMT -4. The time now is 03:13 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.