225s on 17x9 +35 on 2023?
 

Double-checking this fitment with anyone who might be tracking gen2 BRZ/GR86 with lowish offsets...

'23 BRZ, about to be lowered ~30mm on RCE SS-2 coilovers. All factory suspension arms/links. Intended camber -3.5F/-2.5R (rear will be wherever it naturally lands from lowering).

I have 225/45-17 A052s on 17x9 +35 wheels from the '17. Will these fit with stock/unmodified rear fenders?

Also have a set of 17x9 +37 which I intend to get 225/45-17 RT660s for, *if* this would be a known-good fitment without rubbing.

If these offsets are too low, guess it's time for new wheels! Would like to avoid because spending way too much $$$$...

TIA!

+35 is very much an issue in the rear.

About to order 225/45-17 RT660s, they'll go on 17x9 +37 Titan 7s. Fingers crossed...

I might order up a pair of higher-offset wheels for the rear but would like to see if this setup squeaks by...

How bad can it be, just rubbing or can interference lead to more serious fender damage?

225 on 17x9 +37 would be 2mm less of an issue I suppose?