![]() |
Driver Side Window Switch issues
Hey guys!
My car was whacked a while back in the driver side door. Fortunately, just needed a new door and repaint. The body shop swapped everything over to the new door including the window hardware, seals, and electronics. When they returned the car the driver door window switches blink. (they offered to cover diag at a dealership but it was my only vehicle at the time, plus other things, I just never got it done). Symptoms: Both switches blink on driver door When door closes driver window does not seal completely Driver door switch does not control passenger window Driver window will go up on 2nd detent (auto) Driver window does not move on 1st detent of switch up Driver window goes down on 1st detent of switch down Driver window does not auto down with 2nd detent of switch down Troubleshooting so far: Left battery disconnected for 30+ minutes (multiple times over last year) Swapped driver door window switch module (the old one is a nice fidget toy on my desk) Performed reset test per manual Any tips would be greatly appreciated guys, it's not a major issue but a bit irritating seeing the driver window down a smidge when I walk away lol |
Quote:
Bubba suggests that you whack the arm rest that holds the switch two times with the palm of your hand - :iono: |
| All times are GMT -4. The time now is 01:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.