Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   BRZ Second-Gen (2022+) — General Topics (https://www.ft86club.com/forums/forumdisplay.php?f=98)
-   -   FT86 Catted Header - on 2022 BRZ (https://www.ft86club.com/forums/showthread.php?t=152823)

ACT86 03-17-2023 08:45 PM
FT86 Catted Header - on 2022 BRZ
 
Hey all,

Before going ahead, I just wanted to triple check that the FT86 Catted UEL header from my 2017 86 should transfer across to my 2022 BRZ without any hassles?

Thanks in advance for your advice.

Cheers
Ben

https://uploads.tapatalk-cdn.com/202...9d2d8afd3a.jpg

norcalpb 03-18-2023 10:43 AM
Did it end up fitting?

ACT86 03-18-2023 04:34 PM
Quote:
Originally Posted by norcalpb (Post 3573103)
Did it end up fitting?

Dunno. Only asked yesterday. From what I’ve read, I’m pretty sure it will fit. Also measured the piping and it’s not smaller than the 2022 OEM header from what I can determine online.

Just wanted to confirm before pulling apart.

KillerBMotorsport 03-19-2023 09:14 AM
Isn't that similar to the OEM manifold? If so, what are the advantages here?

PulsarBeeerz 03-19-2023 09:33 AM
Quote:
Originally Posted by KillerBMotorsport (Post 3573189)
Isn't that similar to the OEM manifold? If so, what are the advantages here?
As side from having a catalytic convertor the design is very different from OEM. 4-2-1 EL vs 4-1 UEL.

norcalpb 03-19-2023 02:43 PM
Quote:
Originally Posted by ACT86 (Post 3573119)
Dunno. Only asked yesterday. From what I’ve read, I’m pretty sure it will fit. Also measured the piping and it’s not smaller than the 2022 OEM header from what I can determine online.

Just wanted to confirm before pulling apart.
For what it’s worth I put a GR86 skid plate on my 2013 brz and it rubbed against my aftermarket header where that new inlet port is.

ACT86 03-19-2023 10:06 PM
Quote:
Originally Posted by KillerBMotorsport (Post 3573189)
Isn't that similar to the OEM manifold? If so, what are the advantages here?

Purely for sound mate.


All times are GMT -4. The time now is 05:00 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.