Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - Tactrix logging config for ZA1JS10C (2017-2019)

- Software Tuning (https://www.ft86club.com/forums/forumdisplay.php?f=88)

- - Tactrix logging config for ZA1JS10C (2017-2019) (https://www.ft86club.com/forums/showthread.php?t=152015)

Tactrix logging config for ZA1JS10C (2017-2019)

Hi all, I've created a theoretically valid Tactrix logging config for ZA1JS10C (stock), and I'd like to see how it works for others.

This will work on S10C (2017-2019, afaik) with the gen1.5 intake. This will not work on K-series tuner ROMs that have been calid-hacked to S10C, nor on V00C00G (2020, afaik). It might work on other S-series manual-shift ROMs, but I don't really know yet.

Anyways, I'm getting good logs from it for my uses so it's time to see whether anyone sees problems logging with it. Feedback welcome -- and my gratitude to those who came before me that developed the original logcfg.txt files; this wouldn't have been possible without your efforts.

Romraider XML definitions for S10C: https://www.ft86club.com/forums/show....php?p=3572241

Here's v02. I added the port injection ratio (%) target and ECT compensation amounts:

Code:

; final port injection ratio target after PI Ratio calculations

paramname = DiPi_ratio_result

paramid = 0xFFF8A394

isfloat = 1



;; final output of lookups in tables "PI Ratio ECT Compensation";

;; by default, no compensations are applied when ECT >= 80C

paramname = DiPi_ECT_ratio

paramid = 0xFFF8A518

isfloat = 1

Along with a litany of intermediate values from the port injection calculations routine that aren't really necessary in everyday logging, but since I put in the time to document them for myself, may as well include them (see attached).

OTS tunes derived (calid hacked) from K0xx should be able to use these addresses instead; the code is the same (but I haven't tested them):

Code:

FFF8A448 DiPi_ratio_result

FFF8A5C4 DiPi_ECT_ratio