Price friendly spare tire/hardware kit?
 

I tried searching on here. Anyone have the dealership/Subaru part number for mounting hardware and where to buy a spare donut tire wheel setup?

I bought a spare on eBay for 80.00 that was from a 2016 BRZ.
It fits the recess in the trunk cavity perfectly, and I have not found it necessary to bolt it down. It hasn’t shifted around, even under hard cornering.

Auto wreckers usually almost give spares away.

Thank you both!

Not specific to PP or regular
Spare Tire Bolt : 901720002
Spare Tire Washer: 97047FG000

Performance specific parts
PP Spare Wheel: 28151FE030
PP Spare Tire: 28121VA050
PP Spare Foam Insert: 95086CA070
PP Spare Foam Spacer: 97046CA000

Regular spare
Spare Wheel: 28151FJ031
Spare Tire: <Still looking>
Spare Foam Insert: 95086CA040
Spare Foam Spacer: 52153PA181

Be careful about buying a very old tire. And if you are planning to get big brake kit then get performance package wheel. I had wheel oddly placed once, bolt wasn't tight enough and I could hear it going over bump. So would definitely recommend the washer and bolt, I paid about $12 with tax.

Wheel was 124 and then I had to buy tire which I got from tire rack. Subaru tires were pretty old that someone else ordered.

It's not cheap, but if you're looking for new: https://ez-sparewheel.com/products/1...0&%20Submodels)

The PP spare doesn't fit over certain BBKs, such as Brembo B-M4.
I have that BBK and went with a regular spare.
If I get a flat front tire, my plan is to put a rear wheel/tire in the front, and the spare in the rear.

Have you tried with a spacer?

My GT barely clears with a 3mm spacer (under 1mm)

Might not be a good idea to put donut in rear. May be just put full spare in trunk.

The issue is the barrel.
The B-M4 hits the barrel of quite a few wheels that fit PP Brembo without problems.

On eBay I was lucky and found a spare wheel/tire from a 2020 Impreza for $60. Same size as BRZ but there's a greater market supply of them. Got the bolt and washer from my local Subaru dealer.

A regular bolt and some large washers will hold the spare in place. I think it's an M8 bolt.

Just paid 130$ shipped wheel tire from older brz and Subaru parts online for bolt and washer to mount in truck. There is minimal Subarus in junkyard near me