Dan's Trueno Blue Street GR86 Build
 

Hello everyone! Now that I'm about four months into ownership I figured no better time than the present to begin my Member Journal. As my username suggest, been around here for quite a while and this is my third twin. Waited about 6-7 months while this was being produced and luckily picked it up at sticker which was around $33k.

Extremely happy with updated chassis / platform.
At the time of writing this I'm a little deep into my build however I'll go through and post start to present updates that I documented as well as a start vs present day photo of the car over the next few days to get everything up to speed. :cheers:

Current Parts & Modifications

Engine, Exhaust & Dress Ups
• APEXI Post MAF Hose
• GR Drop In Air Filter
• Perrin Billet Oil Cap
• Verus Engineering Coolant Overflow Cap
• Verus Engineering Windshield Washer Cap
• Verus Engineering Brake Fluid Reservoir Cap
• REMARK Axleback (Double Wall Tips)

Drivetrain
• N/A, Maybe in the near future but i'm interested in retaining my warranty at this time.

Suspension & Chassis
• FactionFab FL Spec V2 Coilovers (8.5k F/R. Dampening and Camber adjustable via tophat)
• FactionFab Adjustable Sway Bar Links
• BLITZ Strut Tower Brace
• Alignment Specs: -1.2°F/-2.8°R

Wheels, Tires, Brakes
• RAYS VOLK TE37SL (18x9 +45)
• RAYS VOLK Duralumin Locking Lugnuts
• RAYS VOLK Valve Stem Caps
• Autel TPMS Sensors
• YOKOHAMA ADVAN APEX V601 (255/35/18)

Cosmetic / Body
• Full Front End PPF (3M)
• Ceramic Coating (OPTICOAT Glosscoat + OPTICOAT Hyperseal + DP Glass Coating)
• Ceramic Tint (20% LLumar)
• OEM JDM Clear LED Side Markers



Car as of 11/10/2022: https://i.imgur.com/R54Gmv1.jpeg https://i.imgur.com/xRWacnS.jpg

Little bit of mountain driving with the local club this past weekend!