|
Verus rear diffuser
2 Attachment(s)
Got my pre production diffuser installed. Install is fairly easy using the video on Verus YouTube page. For the sway bar portion I removed the brackets, straightened the bent tabs on the bottom and installed the brackets. Verus did send some BRZ specific bolts and spacers for attaching to the fwd brackets, but they were too short. I had extra bolts and spacers from my under panels that worked. I measured and used 25mm of spacers to work.
|
Looks really good. We’re there any pre drilled holes for the possibly soon to-be-released suspension covers?
|
No extra holes. This is also a pre production model, so that may change.
|
Dope! I, too, elected to try out the pre-production unit. Will post pictures whenever I get it installed.
|
Could it be mounted up any higher if you had a smaller muffler?
|
Quote:
|
Really hoping the production version has the bolts on the side hidden.
Gen 1 diffuser was so clean-looking |
| All times are GMT -4. The time now is 10:19 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.