Traction Control & Vehicle Stability Control wires under the hood
 

Traction Control & Vehicle Stability Control wires under the hood
Hi all. My husband recently changed out my clutch in my 2013 FRS. Unfortunately he knocked the ends off the wires that plug-in for the traction control and vehicle stability control. We need to know how these wires plug into the socket so we can get them back connected. There are two colored wires on each end and we need to know which one goes into the left hole and which one into the right. It’s obvious by the length of each wrapped two-strand wire which side of the socket they go into, but without the end caps (plastic plugs), we don’t know which wire goes where. Any help would be appreciated. Thanks.