|
DIY Side spiltter
1 Attachment(s)
My first attempt at side splitters. I used 1/8" abs air dam material. It's easy to work with but the downside is that the outside edge tends to warp when it stays in the sun. I'll probably glue a reinforcing strip on the underside.
|
| All times are GMT -4. The time now is 05:07 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.