Revert FRS from push to start to regular key ignition
 

I bought a shell but the previous owner had installed a push to start(easy guard), I’d like to remove it and put it back to a key ignition would I just have to buy a steering column ignition assembly or do I have to buy all new ECUs and a whole new dash harness, I’m just trying to fix this because the shell was given to me with no keys

Thanks for reading and I appreciate any info!

There might be a key hidden in the steering column to defeat the immobilizer. I had a push start installed on mine for a while and it was not hard to revert. Essentially just unplugged it and respliced a wire in the ignition switch loom that was split. If you can't find a key that works, maybe a locksmith can help you make a new one

Sent from my ONEPLUS A5010 using Tapatalk

It’s missing the part that you actually stick the key into on the column, like the cylinder lock that the key goes in. and I took apart the entire dash looking for the key and have not been able to find it

what does the vin decode as? limited or premium?

Oh.... Yeah it should have been right there. Sounds like they deleted that shit entirely... You've got quite a mess it seems

Sent from my ONEPLUS A5010 using Tapatalk

Yea it’s a hassle I’m trying to figure out what I can replace to get it to work

Find out what model it is and buy the kit. replace the brain and get new keys. That looks like a cheep Amazon version that can be had for under $100

I actually tried this already and it didn’t work unfortunately

If that is the case then chances are there is another issue besides that. Get the wire diagram for your car a VOM and start checking.