[DIY] 1st gen TPMS sensor relearn via Autel TS508
 

I have not been around for a while. So if this has been discussed before, please forgive my ignorance.

I have two sets of wheels, both of which have all OEM sensors. So it's a hassle to look at the TPMS warning logo on the dash when I am using the set of wheels not from factory. I investigated the issue before, but the solution I found here was pretty clumsy. But recently I became aware of Autel's TPMS tools and decided to try it out. It worked out quite well. So I am sharing it here. Sorry if this has been covered.



Sent from my SM-G981U1 using Tapatalk

Start from the advanced mode

https://uploads.tapatalk-cdn.com/202...cf8570c59b.jpg

Select my car

https://uploads.tapatalk-cdn.com/202...91a8f4c254.jpg

https://uploads.tapatalk-cdn.com/202...89aea7183a.jpg

https://uploads.tapatalk-cdn.com/202...23bb084cd2.jpg

Select position relearn

https://uploads.tapatalk-cdn.com/202...be237883d3.jpg

In general, there are three ways to relearn. Stationary relearn, automatic relearn and ODB 2 relearn. For my car, the last is the only choice. You have to have a tool to do it.

https://uploads.tapatalk-cdn.com/202...3eb00bef33.jpg

Sent from my SM-G981U1 using Tapatalk

The next is the steps for ODB 2 relearn

https://uploads.tapatalk-cdn.com/202...a9ee5edc43.jpg

https://uploads.tapatalk-cdn.com/202...529af0daf0.jpg

https://uploads.tapatalk-cdn.com/202...72b33c4505.jpg

https://uploads.tapatalk-cdn.com/202...eeee8e16ee.jpg

Just follow the instructions. I got to this screen.

https://uploads.tapatalk-cdn.com/202...d274194d74.jpg

https://uploads.tapatalk-cdn.com/202...ce141160eb.jpg

https://uploads.tapatalk-cdn.com/202...167d93b9c1.jpg

https://uploads.tapatalk-cdn.com/202...f29a06e618.jpg

And that's it! The light on the dash is gone. This is much easier than some previous post I have seen before. But that was 3-4 years ago. Maybe things have changed?

Sent from my SM-G981U1 using Tapatalk