![]() |
Tune for Stg2 E85 with 650Injectors
Car is currently tuned to run my Vortech kit with 650injectors. Although I've pulled the blower to change a seal and get some powder coating done, but I'd still like to drive the car in the meantime and would easily be able to flash a Stg2 E85 tune, if it wasn't for the injectors.
Either that, or I'm assuming the tune is safe I'm running for the Vortech, I would just need the MAF retuned for the OEM air intake and the car would run as if I'm not into boost, at least that's my assumption. Any advice or ROM tables I can copy, or willing to adjust the tune themselves for some $$? Thanks in advance. |
sent you a PM i can help you
|
Quote:
If you have a vortech SC tune in ecu for 650 injectors and map sensor and E85 and you just removed SC and same injectors map and fuel then fine to drive car on the SC tune without the SC fitted. the maf scaling might be off a bit but running a boost tune when NA is fine assuming same injectors and map sensor still fitted and running same fuel |
| All times are GMT -4. The time now is 05:57 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.