![]() |
audio varies
Hi all,
I've had my car a couple months but I've just noticed something the past couple weeks. When I turn on the stereo and select what station to listen to, the volume level is kinda low, then after about 5 seconds, it increases significantly. After the initial increase, it does not vary. This has caught me off guard a few times as I manually increase the volume and then it gets too loud a few seconds later and I have to lower it manually. Anyone else notice this or has my stereo become haunted?:iono: |
Quote:
|
Most likely hd, just watch the display when it happens. The stereo also has auto sound leveling based on noise which you can adjust for , its in the stereo manual.
Sent from my PH44100 using Tapatalk 2 |
It's the HD radio. Picks up the non-HD station first then once the HD signal is detected it transitions and poof, there's your difference. You didn't notice it sounds significantly better after that happens right?
|
You guys are correct - it was the HD setting. I tried it both ways and it only does this when HD is 'on'.
Thanks. |
| All times are GMT -4. The time now is 12:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.