Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   BRZ Second-Gen (2022+) — General Topics (https://www.ft86club.com/forums/forumdisplay.php?f=98)
-   -   CSG Spec Brembo BBK fits 2022+ BRZ. (https://www.ft86club.com/forums/showthread.php?t=147965)

CSG Mike 12-13-2021 04:47 PM
CSG Spec Brembo BBK fits 2022+ BRZ.
 
Title says it all.

CSG Mike 12-14-2021 02:50 AM
https://scontent-lax3-1.xx.fbcdn.net...sg&oe=61BCF528

https://scontent-lax3-1.xx.fbcdn.net...yw&oe=61BDF3B9

WC-BRZ 12-14-2021 03:04 AM
No red calipers no care :bonk:

Stonehorsw 12-14-2021 12:35 PM
Effective radius? Total piston area (or individual diameters)? Std pad? Cleans 18” stock wheels?

Ohio Enthusiast 12-14-2021 01:50 PM
Brake bias front/rear? There were some misinformed posts from early in the first gen that never really got corrected (with regard to piston diameters). Now's a good time to measure front/rear to determine BBK impact on bias.

racingfool 12-14-2021 01:51 PM
Quote:
Originally Posted by CSG Mike (Post 3488561)
Title says it all.
So where do I find these? Got a link?

Racecomp Engineering 12-14-2021 02:15 PM
Quote:
Originally Posted by Ohio Enthusiast (Post 3488773)
Brake bias front/rear? There were some misinformed posts from early in the first gen that never really got corrected (with regard to piston diameters). Now's a good time to measure front/rear to determine BBK impact on bias.
2nd gen OEM small calipers are same part number as 1st gen.

- Andrew

CSG Mike 12-14-2021 02:40 PM
Quote:
Originally Posted by racingfool (Post 3488775)
So where do I find these? Got a link?
https://www.counterspacegarage.com/b...front-gt86-1pc

CSG Mike 12-14-2021 02:41 PM
Quote:
Originally Posted by WC-BRZ (Post 3488683)
No red calipers no care :bonk:
Red is available.

Quote:
Originally Posted by Stonehorsw (Post 3488744)
Effective radius? Total piston area (or individual diameters)? Std pad? Cleans 18” stock wheels?
The base calipers are identical to the 1st gen, so biasing/sizing will be more or less identical to the 1st gen.

Quote:
Originally Posted by Ohio Enthusiast (Post 3488773)
Brake bias front/rear? There were some misinformed posts from early in the first gen that never really got corrected (with regard to piston diameters). Now's a good time to measure front/rear to determine BBK impact on bias.
Same as above.

Stonehorsw 12-14-2021 04:08 PM
Quote:
Originally Posted by CSG Mike (Post 3488797)
Red is available.



The base calipers are identical to the 1st gen, so biasing/sizing will be more or less identical to the 1st gen.



Same as above.
Hello Mike,

I was asking regarding the data for Brembo’s GT caliper. I can run the calculation (already done for base caliper and sent a screenshot on other thread)

Bukowski 12-14-2021 10:00 PM
What is the minimum diameter wheel required to run these kits?

zeroomega 12-14-2021 11:56 PM
How should I rebuild the kit when the seal goes bad. Do you sell a rebuild kit?

teppey 12-15-2021 04:43 AM
To maintain brake bias, should we change rear brake as well or leave it stock?

CSG Mike 12-15-2021 03:57 PM
Quote:
Originally Posted by teppey (Post 3488940)
To maintain brake bias, should we change rear brake as well or leave it stock?
Leave it stock, or put on a matched rear GT kit. Most people leave it stock

Quote:
Originally Posted by zeroomega (Post 3488903)
How should I rebuild the kit when the seal goes bad. Do you sell a rebuild kit?
With the rebuild kit that is available.

Quote:
Originally Posted by Bukowski (Post 3488881)
What is the minimum diameter wheel required to run these kits?
17


All times are GMT -4. The time now is 01:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.