Front wheelstud replacement w Brembos?
 

What is degree of difficulty? I'm at the track need to decide whether try to replace here or find a shop

It's the same thing with or without brembos: Remove caliper, remove brake disc, hammer the broken stud out towards the back, insert new stud, use wheel nut and a big bolt to tighten and pull the new stud into the hub.

The rest is reverse of removal

Just get one off these. As you get tell by the pic I already bought one myself. https://uploads.tapatalk-cdn.com/202...7f45c6e80e.jpg

Sent from my SM-G998U using Tapatalk

He's probably not going to order that on amazon and wait at the track for it to be delivered. That's why I said to use a big nut.

That is also not a wheel stud remover, that's a wheel stud installer. A wheel stud remover is a hammer.

https://youtu.be/9bZQeF-49Bo

But you don't need the installer, you can get by with a large nut under the lug nut.

I guess so lol.

Sent from my SM-G998U using Tapatalk