Fixing loose shifter
 

I have a loose shifter, which has been loose ever since I took my car to a shop for a clutch install 5 years ago. I have not figured out how to fix it, and have been checking previous pages on these forums to figure it out but we never got it. I don't really get under the car very often, so looking to see if somebody else has worked on this problem.

https://www.youtube.com/watch?v=BEffEiSGA2Y

Does anybody know how to fix this. I'm trying to figure out what bushing or perhaps boot might be missing or might be torn/damaged.

You'll have to get underneath the car to find the missing or worn nylon bushing. That's all it is.

here's a diagram
https://www.subarupartwholesale.com/...10-350-01.html

could be a problem where the pivot pins go thru bushings. Maybe one of the cotter pins is missing and the pin is backing out, allowed bushing to wear badly. Possibly loose bolts or bushing at the rear where the shifter support frame mounts to the floor pan. Could be a number of things. I think if you get the under tray removed and have someone wiggling the level while you watch those points it will be obvious.

Even wiggling it from underneath is easy. I like the parts diagram more than the one in the service manual. Nice.