RCE Tarmac 2, SPC LCAs, Eibach sways, WL toe arms, Raceseng cas/cam, brake pads etc.
 

Stock axles 75k miles, driver side was starting to make noise but I believe it could be rebuilt. Passenger side was still in great condition. - $80 for both



https://live.staticflickr.com/65535/...1b978f15_b.jpgUntitled by hatchethairy, on Flickr


Cobalt Friction Racing XR2 pads brand new front and rear - SOLD

Whiteline KDT923 diff outrigger bushings brand new - SOLD

Cusco tow hook - SOLD

Eibach sway bars - SOLD

Tow bar and brand new wiring harness - SOLD

RCE Tarmac 2s with Raceseng Cas/Cam plates 500 pounds springs - SOLD

Front lower control arms with Whiteline bump steer kit AND caster kit installed. New boots and grease, no play in ball joints at all. - SOLD

SPC lower control arm LCAs - SOLD

Whiteline toe arms - SOLD

Racer X sway links for front and rear - SOLD

Grimmspeed strut bar - SOLD

Grimmspeed brake brace - SOLD

EBC Yellow pads brand new front and rear - SOLD

Carbotech XP10 pads used with ~1cm of pad left front and rear - SOLD

SPC 81260 cam bolts new - SOLD

Whiteline KCA416 camber bolts used - SOLD

5x100 spacers 2- 3mm and 2- 5mm - SOLD

Some nice stuff in here! How many miles/track days approximately on the RCE t2s?

I've run 4 track days and around 4000 miles on these. Bought them used with roughly 10k miles on them. I previously ran KW v3s before and I think the Tarmacs were well worth the step up.

interested in the grimmspeed strut bar and the white line camber bolts

For the control arms, that is parts KCA434 and KCA435? Curious if the tie rods are included?

Sent from my ONEPLUS A5010 using Tapatalk

Correct. Stock arms with the bump steer ball joints, tie rods, and the caster bushings pressed in. All will be sold together as one.

PM Sent

Bump!


Make offer on Cobalt pads and axles if interested.

BUMP

Shoot me an offer on the pads and be the racer you always wanted to be.