Supercharger install
 

Looking for an individual to help me install a supercharger kit. The shop is wanting 15-20 hours of labor, which is a rip off..

Still deciding between edelbrock or harrop.

Pm or text me your rate and experience if interested

Thanks in advance

Where are you located?

Sent from my SM-G998U using Tapatalk

I am located in Northern VA but I am willing to make a travel up to 6 hours.

if i had a 2 car garage id be 1/2 joking to bring it up to pa and we can install them on both out cars. i have so much fucking work to so with a harborfreight slim jack and a skinny 1 car garage :(

I am thinking about getting jackson racing super charger
you can get car tent something to work inside
I have a garage but full of shits inside so i am thinking to get car ten in future to do mine later

If you get the Harrop, you don't have to do everything at once. I have the front-mounted heat exchanger, water pump and all of the tubing run already and the wiring ready to connect. I've been driving it this way for several months while I'm performing other mods to the car. (You don't HAVE to remove the front bumper to install this kit.)

I'd kind of like to have help getting my kit installed the rest of the way too. Oh, and I have the Ecutek ProECU kit to flash the ECU already.

I'm located about two hours away from the VA border near Huntington, WV taking I-77/I-64.

Hell, I'd help ya install it for free. Did my own, when I had a garage. To be honest, the Edelbrock instructions are 100% easy to understand and follow (very similar to a lego instruction booklet in regards to step by step) with plenty of photos. Once you buy it you'll see what I mean. It also tells you what tools you'll need to get it done.
It could be completed in 8hrs or so. I took my time and spread it out through a few weekends.