Originally Posted by NIKDENG (Post 1121102)

@ayuk,

For the street, I use STi pink performance springs which lowers the car a conservative 15mm or .6 of an inch but gives the car much better handling than the stock springs without sacrificing comfort. For track I use race proven Dynamics Performance Engineering coil-overs which I lower 1 inch. Rides a little harsh for use on the streets but sticks to the corners like glue with very little body roll on the track.

@ayuk, since you are from Pasig, if you have your car, you can drop by Autokozmetix and you can test fit my set of RKRs with Michelins 235/40 tires which I temporarily left there so you can see how it would look on your car set-up. @dhoeze you can also try it out if ever you are near the Pasig area. Mine is the one with the red lip pinstripe as shown in the picture below when it was installed in my ca

http://img856.imageshack.us/img856/7421/be1b.jpg

Originally Posted by pa3ck32 (Post 1124760)

I just got my BRZ today :-)

Guys, pasend naman ng invite sa FB group. Thanks!

Originally Posted by NIKDENG (Post 1124873)

@dagame,

I left my Chargespeed side skirts and rear spats with Mike at Autokozmetix if you are still interested. Its already painted flat black which should match your Rhino rubber lip spoiler.

Originally Posted by dagame (Post 1124913)

yeah i saw it at autokozmetix nga, mike showed it to me last time i was there. but i'm still thinking if i'm going to put skirts on my brz since the clearance from the ground is at 3-4" nalang and i'm a little worried that if i put skirts i'm just going to waste money cos mababasag ko lang din if it'll constantly hit speed bumps and what nots.

Originally Posted by NIKDENG (Post 1124930)

You should have no problem with the chargespeed skirts as they actually doesn't go below the current side body line thus the ground clearance is not affected at all. It is also made from flexible carbon fiber and not fiberglass. Won't shatter.

Originally Posted by dhoeze (Post 1126346)

Thanks @NIKDENG

*Ot: are you selling those RKR's already?

Originally Posted by pcuerpo (Post 1127293)

now im more confused on going squared or staggered hehe

any of you seen a Rota RT5 locally? seeing some posts of that here and they look nice.. Rota Titan looks nice too but they're only made in 17s