Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

- Electronics | Audio | NAV | Infotainment (https://www.ft86club.com/forums/forumdisplay.php?f=27)

- - Wiring Amp *HELP* (https://www.ft86club.com/forums/showthread.php?t=144397)

I have spent hours upon hours reading forms trying to find a way to get this to work without destroying my factory harness. I have a 2013 FRS with the stock head unit which has RCA's. My power wire and RCA's are ran and ready to go.

However, I need to find a way to make a power wire work. Is there a way to get power to your power wire without splicing into the existing wire and soldering them together?

** Edit :This is gonna go down as the dumbest post on this forum. I meant to type remote wire and typed power wire instead. Lol. We got it though. Posi-Taps were exactly what I was looking for. **

Your power wire should be a fused line to your battery. I would not recommend using any factory wires to supply power to your amp.

Follow the amplifier manufacturer's installation instructions.

+1 battery....very easy and lots of room to fish through..

Simple answer look it up on YouTube. "Amp install on brz/frs".
There you go.