I drove my back right wheel off a curb, and my rear bumper's right side popped out
 

I was able to push it back in enough to not catch wind and drive home.

I can see that a bumper is just held in by plastic nubs and clips. I watched this video https://www.youtube.com/watch?v=OwKYiQkwx8A of a bumper removal.

The problem is, the black plastic that the bumper attaches to, broke on that right side. The last 2 clips worth of black plastic is broken off from the rest of the black plastic that the rear bumper attaches to.

I tried googling and forum searching but couldn't find something addressing my problem, its all about the bumper itself

Does anyone know what the "bumper holder" black plastic is called? And if you can buy that component and attach it yourself to the car

https://www.ebay.com.au/itm/SCION-FR...-/113499011049

Is this it?


Sent from my SM-G973F using Tapatalk

https://parts.subaru.com/images/part...0_59101280.png
https://parts.subaru.com/a/Subaru_20...10-591-01.html

You can find a similar diagram and parts listing at parts.toyota.com if you want to find Toyota's version of the part numbers. Either way the brackets are the same.

Thank you both @pope @Purist

Ill be looking to those diagrams in the future when I run into this "idk what i am looking for" issue. Thank you guys for saving me a lot of headache