[SOLD] Full Blown Motorsports Stage1 Turbo Kit
 

[s]Selling my FBM Base turbo kit off my 2013. Ran for 37,000miles. All hard. The GTX turbo I was running blew up and I am selling this with the garret 57trim t3 turbo I originally ran (for about 11k miles @ around 290whp.) All parts functioning and well used (read: track use.) See Pictures.


FBM Stage 1 Base Turbo Kit
57trim T3 Garret TurbochargerWrinkle Black Charge Pipe Coating
Black Intercooler
Non-coated Equal Length 3" Turbo Manifold (with black header paint)
3" Downpipe (Open Dump Version)
Precision Turbo 39mm Wastegate
Tial 50mm Q BOV


To complete this kit you will need to source the following.
Tune, Port Injectors (old 550's are included but, I don't recommend reusing them as they sat a long time,) OMNI MAP Sensor (again a 3bar is included but sat forever,) and a Fuel Pump (not included.)

I have included a brand new FBM High-Capacity Oil pan as the old one got smoked during removal and some new oil hose for the oil drain should you not buy a pre-made one. Also including a used FBM's Oil Catch Can (PVC) with battery mounting bracket. You will need to source you own slim radiator fans, or aftermarket cooling package as they are not included with the kit. These can be bought through FBM or included in any of the presorted rad/fan/shroud packages from FBM, Mishimoto or Verus.



Parts have been sitting for a while in the garage for 3 years and are boxed up ready to go since I switched to their premium kit in 2018. I expect shipping inside the mainland US to be around $120 USD due to the size and weight of the box. I will be shipping via UPS Ground and provide receipt.

Asking $2750 shipped. OBO. Payment accepted is paypal. or $2500 Cash if your going to pick it up yourself. Located in the middle of the USA in KC (Go Cheifs!) I expect to only need 3 days handling time. I'm not sure how fast shipping will be with UPS given covid delays but, tracking and the work will all be included.

Thanks.[/s]

Still selling?

Yup... er nope