No idea how to detach the old wiper blades
 

They are RainX brand. I looked all over YouTube but found nothing.
Anyone have any idea how to detach this style wiper?

Push the release tab and push the wiper head towards the car don`t pull it away

https://www.ezwipers.com/wipers/Subaru/BRZ/2016/change

Yes, that is what I was doing. Tried both directions.
Do these blades get welded on somehow?

There is a tab on the bottom where the hook is.
Push it towards the wiper arm and pull the blade towards the car.

It is probably a bit stubborn but it'll release with elbow grease.
I usually end up twisting the blade so it's horizontal and using it as leverage to push to out.

Yup, I also tried making the blade parallel to the arm as I yanked it towards the base of the wiper arm. Nothing.
I might need to get a helper to hit it with a hammer or something.
Never had this much trouble. Wondering if the seller Krazy Glued this on. I've seen worse.

I read another thread that says you need to lift a latch.
I am not near my car, but there is a latch you need to open???

Click the link in the 2nd post of this thread.

Do not click the helpful link in the 2nd post of this thread. It's obviously a virus! These guys are tricking you! You have to replace the entire wiper arm :O

reported

Oh C`mon!:mad0260: it`s obvious they are highly adaptable and I want to take over their computer

LOL, I already clicked the useless link.
And I already stated that I already tried to push the wiper towards the base of the wiper arm.

Ok, so there is a latch?
That useless link in #2 makes no mention of that.
I'll try it tomorrow ! Thanks for your expertise !

*sigh* straight from the rainx website. Less than a minute.
https://www.rainx.com/product/rain-x...allation_video


https://www.youtube.com/watch?v=i7ArW2r4AfI