| gmetal |
11-01-2020 06:09 AM |
[RESOLVED] Very Strange Gear Indication Issue
Hi Everyone, long time lurker first time poster.
Recently got a set of UELs + an Invidia Q300 & and Ecutek dyno tune by a reputable local tuner where I live. Everything seems great except for one quirk that popped up after the tune:
When shifting into 5th gear, most of the time, now the gear indicator on the dash does not provide a number, or after some thinking indicates 4th! This happens only for 5th (all other gears fine), and the actual gear engagement feels fine, just the number displayed.
What seems exceptionally strange to me is mys understanding is that this cant be a sensor issue, as the gear indicaiton isnt from a position sensor, but instead is software calculated from speedo & tacho measurements, to find the ratio.
Obviously ive had no gearbox or final drive changes, so this seems weird.
Does anyone have any idea of what may be wrong or troubleshooting steps? is this some kind of software bug?
Things ive tried:
- checking OBD2 diagnostic error codes (none)
- shifted up and down into 5th, at different speeds, fast & slow with the clutch.
- Turned the car off and on
- reset the dash settings & turned off and on the gear speed indication.
2017 86 GTS with the LCD screen in the dash.
Thanks in advance, all ideas welcome!
Edit: problem was resolved by the tuner reflashing the same tune again. May have just been a corruption.
|