TRD High Response Muffler Ver. R. exhaust tip fitment
 

Anyone know if these quad tips would fit the same like the TRD High Response Muffler Ver. R.?
__________________
63mm in - 89mm out Quad Tips
https://www.aliexpress.com/item/3267...c00TlrdR5&mp=1

Exhaust
https://www.86worx.com/trd-high-resp...ler-ver-r.html

i think youre gonna have to cut the bumper but as long as the pipes are centered it should fit the same. If ordering off aliexpress I hope you dont expect those tips to come in 2020 lol

They may be close but for $30 I wouldn't expect a lot.
They will NOT fit the Hakone diffuser though. Not sure they even make the wide opening trim for the 17+ diffuser.

those quad extension tips don't look that great on the rounded dual cutouts on the rear bumper. go with nice looking dual tip catback or cut into the bumper to fit in a quad tip catback. I'd be wary of the Alibaba stuff as fitment and quality may be hit or miss

Yeah I know I'll have to cut into it if I put that bumper on. Lmao you damn right that won't come till 2021 :lol:

Yeah, quad tips won't fit the stock exhaust trim. I'll be cutting into them :evil:

Some quad tip extensions pieces fit but they just look out of place since they are tiny and don't mesh well aesthetically with the round cutouts for the OEM duals

The cutting really is simple I'd advise using an low vibration air saw as it made the cut much smoother and straighter. You can get by using a rotary tool like a Dremel but the cut will not be as clean. I started off with a rotary then switched halfway with airsaw and it was night and day difference