FT86SF cat back help
 

Hey guys,

I bought a V2 catback used, and the original owner neglected to include the bolts that join the mid pipe to the front pipe and the v band clamp for the muffler. I tried using a 2.5in v band clamp that I found at my local shop but the groove isnt the right size for the flanges, it's on there but I don't trust it. Tried some other exhaust bolts and they weren't tight enough and they worked their way out.

I reached out to FTSpeed offering to buy the set of hardware, figured they'd help me out since I've spent a ton of money there over the years, and they said sorry we don't sell the hardware separate and don't know what size it is. I wrote back again begging, SOMEONE there has to know the sizes, they order it and include it with the system, and the CS rep basically said, sorry, we can't help you. I was pretty shocked, I've normally had very good support through them.

Could someone who has this system (or the V1, hardware should be the same) do me a huge favor and help me figure out the correct brand of 2.5in v-band clamp they use (maybe it's stamped on the side?) so I don't have to go spend $100 on various different brands until I find the right one? Also need to know the length of the correct length for the bolts that join the mid pipe to the front pipe.

Thank you